Manual

TX NR702,602 t n book Page 76 Monday,July 26, 2004 11:05 AM
Zone 2
With the Zone 2 flmction, you can enjoy one input
source in the main room and a different source in another
roonl.
There are two connection methods: using a receiver/inte-
grated amp in Zone 2 or using only a pair of speakers in
Zone 2.
Using a Receiver/Integrated Amp in Zone 2
With this connection method, you can use 7.1 surround
sound in the main room and play a different AV source in
Zone 2. The volume for Zone 2 is set on the receiver/
integrated amp.
• Use an RCA audio cable to connect the AV receiver's
ZONE 2 LINE OUT L/R jacks to an analog audio
input on your receiver/integrated amp.
• Connect the Zone 2 speakers to the speaker terminals
on the receiver/integrated amp.
Main room
t AVreceiver/
Zone
[ integrated amp
1
}
Using Only Speakers in Zone 2
With this colmection method, you can use 5.1 surround
sound in the main room and play a different AV source in
Zone 2. The volume for Zone 2 is set on the AV receiver.
• Set the Powered Zone 2 setting to Activated (see
page 77).
• Connect your Zone 2 speakers to the AV receiver's
ZONE 2 SPEAKERS terminals.
Main room
............££g£i;_£gai............?
+ -
Zone2
L
1
7R