Manual

TX NR702,602 t n book Page 60 Monday,July 26, 2004 11:05 AM
Basic OperationmContinued
See "About the Listening Modes" on page 62 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver
STEREO
PURE AUDIO "9 LISTENING MODE ="
[PURE AUDIO] button (not American
TX-SR602)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
[STEREO] button
This button selects the Stereo listening mode.
LISTENING MODE [_1] [1_] buttons
These buttons select all the listening modes that can
be used with the current input source.
Modes can be selected in the following order,
depending on the input signal format:
Pure Audio "+ Direct "+ Mono "+ Surround (e.g.,
PLIIx, Neo:6, Dolby D EX, DTS/DTS 96124, DTS-
ES, and so on) -+ Onkyo original DSP
Selecting with the Remote Controller
RC-588M
ALL ST
POREA - DSP,-
o.°.c. .os.
....... II
RC-590M/591 M
II ALLST
SURR-- @ STEREO
PUREA-- __--DSP_
(not @ _ @_ _- < DSP
RC-S90M) @_]5 @ @
DIRECT I
[SURR] button
This button selects the Dolby Digital, Pro Logic Ilx,
Neo:6, DTS, and other listening modes.
[All ST] button
This button selects the All Ch Stereo listening mode.
[THX] button (TX-SR702/702E only)
This button selects the THX listening modes.
[STEREO] button
This button selects the Stereo listening mode.
[PURE A] button (not American TX-SR602)
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned oft'.
[DIRECT] button
This button selects the Direct listening mode.
[< DSP] & [DSP I_] buttons
These buttons select the Onkyo original DSP modes.
60