Manual

TX NR702,602 t n bool_ Page 53 Monday,July 26, 2004 11:05/'kb'I
Basic Operation
...............................................................................................................................................................................................
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
OZ_Kyo
E?
©®
3
m
m
source.
receiver's input selector buttons to select the input
To select the input source with the remote controller, press the
[RECEIVER] button, and then use the INPUT SELECTOR buttons.
On the remote controller, the IVI1, IV2], IV3], and IV4] buttons select the
VIDEO 1, VIDEO 2, VIDEO 3, and VIDEO 4 input sources respectively.
Only the RC-588M remote controller has a [PHONO] button.
Start playback on the source component.
When you select DVD or another video component, on your TV. you'll need to
select the video input that's connected to the AV receiver's MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
To adjust the volume, use the MASTER VOLUME control, or the
remote controller's [VOL] button.
The volume can be set to MIN, 1 through 99, or MAX.
The AV receiver is designed Ibr home theater enjoyment. It has a wide volume
allowing precise adjustment.
_.q