Manual

TX NR702,602 t r_book Page 51 b'Io_day,July 26, 2004 11:05 AM
First Time Setup--Continued
Equalizer Setting Use the Left and Right [_1]/[1_]
¢ -'_ _ buttons to select:
his setting is set automatically by tile Automatic Off: Tone off, response fiat.
LSpeaker Setup function (see page 39).
• Auto: The tone for each speaker is
Here you can adjust the EQ of individual speakers. The set autonmtically by the Auto-
volume of individual speakers can be set on page 50. matic Speaker Setup function.
Manual: You can adjust the EQ of each
If you select Manual, continue with this
procedure. If you select Off or Auto, go
to ste 8.
1 __l Use the Down [IV] button to
select a speaker.
2,3 I I._._%_ O ,oou
2-7 2-4. Equalizer Settings
; 2 86Hz i 6ag
b. 250Hz : 0dg[_
c. 800Hz : 0dg[_
d.2.SkHz : 0dg[_
: e. 8kHz : 0d a
Use the Up and Down [A]/[V]
buttons to select a frequency,
and then use the Left and Right
[_]/[1_] buttons to adjust the
level at that frequency.
The volume at each frequency can be
adjusted from -12 to +12 dB in 1dB
steps
.... Tip: Low frequencies (e.g., 80Hz)
affect bass sounds; high frequencies
(e.g., 8kHz) affect treble sounds.
Use the Up [A] button to select
"Left, and then use the Left and
Right [_1]/[1_] buttons to select
another speaker.
Repeat steps 6 and 7 for each speaker.
ressthe button.
_,_, The setup menu closes.
Notes:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and IENTER] button.
51