Manual

) TX NR702,602 t rlbook Page46 b'IoI_day,July 26, 20(14 11:05 AM
First Time Setup--Continued
Some of the settings in this section are set automatically
by the Atltomatic Speaker Setup function (see page 39).
Here you can check the settings made by the Automatic
Speaker Setup function, or set them manually, which is
usefld if you change one of the connected speakers alter
using the Automatic Speaker Setup flmction.
Speaker Configuration
This setting is set automatically by the Automatic
peaker Setup function (see page 39).
J
Here you can specify which speakers are connected and
their individual sizes.
For speakers with a cone diameter
over 6-1/2 inches (16 cm), specify
large, and for those with a diameter
below this, specify small.
For the TX-SR702/702E, if you're
using THX-certified speakers, spec- Cone diameter
ify Small for all speakers.
f
__
..... j
Dt_UE_ SLE_
2-11
1, 12
® ®ll
Press the [RECEIVER] button fol-
"_i_ lowed by the [SETU p] button"
The main menu appears onscreen.
Use the Up and Down [A]/[V]
buttons to select "2. Speaker
Setup," and then press [ENTER].
The Speaker Setup menu appears.
Use the Up and Down [All[V]
buttons to select "1. Speaker
Config," and then press [ENTER].
The Speaker Config menu appears.
Nenu
2.Speaker Setup
2-1.Speaker Config
b. Front :Large_
c.Center :Small_
d.Surround :Small_
e.SurroundBack :Small_
f. SurrBack ch :2ch_
g.Crossover :lOOHz_
h.Double Bass :Off[_
Use the Up and Down [All[V]
buttons to select "a. Subwoofer,"
and then use the Left and Right
[_1]/[I_] buttons to select:
Yes: Select ifa subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
Use the Up and Down [All[V]
buttons to select "b. Front," and
then use the Left and Right [_ly
[1_] buttons to select:
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
Note:
• If the Subwoofer setting in step 4 is
set to No, this setting is fixed at
Large.
ztR