Manual

m How to connect and setup
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,,,
Confirm the connecting and setting.
1. Connect the HDMI OUT jack to the HDMI input
jack of the TV.
Blu-ray Disc/DVD player, etc.
HDMI
connection
[caAV receiverJ
DIGITALAUDIO _ _ HDMI
connection connection
(OPTICAL)
TV, projector, etc.
2. Connect the audio output from the TV to the
OPTICAL IN 2 jack of the AV receiver using an
optical digital cable.
• When the audio return channel (ARC) ftmction is used
with TV for HDM[ 1.4, it should not be this connection
(_ 52).
3. Connect the HDMI output of the Blu-ray Disc/
DVD player/recorder to the HDMI IN 1 jack of
the AV receiver.
• It is necessary to assign the HDM[ input when connecting
the Blu-ray Disc/DVD player/recorder to other jacks
(_ 39). Do not assigu the components connected to the
HDM[ IN to the TV/CD input at this time. Appropriate
CEC (Consumer Electronics Control) operation can not be
guaranteed.
Change each item in the "HDMI Setup" as below:
• HDMI Control (RIHD): On
• Audio Return Channel (ARC): Auto
• Power Control: On
• TV Control: On
See for details of each setting (@ 51,59).
ii !iiiiiii!iili i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiii....
Confirm the settings.
1. Turn on the power for all connected components.
2. Turn off the power of the TV, and confirm that
the power of the connected components is turned
off automatically with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD
player/recorder.
4. Start playback of the Blu-ray Disc/DVD player/
recorder, and confirm the following.
• The power of the AV receiver is turned on
automatically, and input with the Blu-ray
Disc/DVD player/recorder connected is
selected.
• The power of the TV is turned on automati-
cally, and input with the AV receiver con-
nected is selected.
5. Following the operating instructions of the TV,
select "Use the TV speakers" from the menu
screen of the TV, and confirm that the audio is
output from the speakers of the TV, and not from
the speakers connected to the AV receiver.
6. Select "Use the speakers connected from the AV
receiver" from the menu screen of the TV, and
confirm that the audio is output from the speak-
ers connected to the AV receiver, and not from
the TV speakers.
• Perform the above operations when you initially use the
AV receiver, when the settings of each component are
changed, when the main power of each component is
turued off, wheu the power cable is disconnected from the
power supply, or wheu there has been a power outage.
Operate with the remote controller.
For buttons that can be operated (@ 64).
• Audio from DVD-Audio or Super Audio CD may not out-
put from the TV speakers. You will be able to output the
audio from the TV speakers by setting the audio output of
the DVD player to 2ch PCM. (It may not be possible
depeudiug on the player models.)
Even if you set to output audio on the TV speakers, audio
will be output from the speakers connected to the AV
receiver when you adjust the volume or switch the input
on the AV receiver. To output audio from the TV speakers,
re-do the operations on the TV.
Do not connect the 1-41 cable when connecting to the 1-41
and 1-41 audio control compatible components.
When you select anything other than the HDM[ jack
where the AV receiver is connected as the input ou the TV,
input ou the AV receiver will be switched to "TV/CD".
The AV receiver will automatically power on in coujuuc-
tiou when it determines it to be uecessary. Even if the AV
receiver is connected to au r-tl I-liD compatible TV or
player/recorder, it will not power ou if it is not necessary.
It may not power on in coujuuctiou when the TV is set to
output audio from the TV.
Linked functions with the AV receiver may not work
depending on the model. Operate the AV receiver directly
in such cases.
ED
74