Manual

To control another manufacturer's component, point
the remote controller at that component.
To control all Onkyo component that's not connected
via f-_l, point the remote controller at the compo-
nent. Be sure to enter the appropriate remote control
code first.
63
63
N The AV receiver unexpectedly selects your iPod
as the input source
Always pause iPod playback before selecting a dif-
ferent input source. If playback is not paused, the
Direct Change function may select your iPod as the
input source by mistake during the transition
between tracks.
l;i'q'd t l
N Can't record
On your recorder, make sure the correct input is
selected.
rtCi/'., l
N There's no sound
Make sure your iPod is actually playing.
Make sure the UP-A 1Dock is connected to the ONI- --
VERSAL PORT jack on the AV receiver.
Make sure the plugs are pushed in all the way.
When the Pure Audio listening mode is selected,
recording is not possible because no video signals
are output. Select another listening mode.
N There's no video
Make sure that your iPod's TV OUT setting is set to
On.
Some versions of the iPod do not output video.
N The AV receiver's remote controller doesn't
control your iPod
[=Jh'F31rt
Make sure your iPod is properly inserted in the
Dock. If your iPod is in a case, it may not connect
properly to the Dock. Always remove your iPod
from the case before inserting it into the Dock.
Make sure you've selected the right remote mode.
When connecting UP-AI Dock to the radio tuner
UP-HTI (North American models)/UP-DTl
(European, Australian and Asian models) with
AUTO selected by the tuner's Mode Selector switch,
you can switch the input source between UP-AI
Dock and the tuner, by pressing PORT repeatedly
on the front panel.
Try resetting your iPod.
N There's no sound
Only components connected to analog inputs can be --
played in Zone 2.
N The Zone 2 speakers produce no sound
Powered Zone 2 cannot be used if "Speakers Type" 41
is set to "Bi-Amp".
N The sound changes when I connect my
headphones
When a pair of headphones is connected, the listen- --
ing mode is set to Stereo, unless it's already set to
Stereo, Mono, Direct, or Pure Audio. (Pure Audio
listening mode is not available for North American
models.)
N The speaker distance cannot be set as required
[n some cases, corrected values suitable for home --
theater use may be set automatically.
N The display doesn't work
The display is turned off when the Pure Audio listen- --
ing mode is selected.
N How do I change the language of a multiplex
source
Use the "Multiplex" setting on the "Audio Adjust" 44
menu to select "Main" or "Sub".
N The R I functions don't work
To use RI, you must make an f'_l connection and an 20
analog audio connection (RCA) between the compo-
nent and AV receiver, even if they are connected dig-
itally.
Erl
69