Manual
Controlling Zone 2 with the Remote
Controller
..............., i ON/STANDBV
.......ZONE2
< I
Input selector buttons
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!,,
Press ZONE2 and then press ON/STANDBY.
Zone 2 turns on, the ZONE 2 indicator lights.
To select an input source for Zone 2, press
ZONE2,followed by an input selector button.
To select AM or FM, press the TUNER input selec-
tor repeatedly.
(North American models) You can also select SIR-
IUS.
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
To turn off Zone 2, press ZONE2 followed by ON/
STANDBY.
• To control Zone 2, you must press the remote controller's
ZONE2 first.
Adjusting the Volume for Zone 2
m Operating with the remote controller
Press ZONE2.
Use VOL I/V to adjust the volume.
m Operating on the AV receiver
Press ZONE 2 (the ZONE 2 indicator and Zone 2
selector on the display flashes).
Use -/+ within 8 seconds to adjust the volume.
If your Zone 2 speakers are connected to a receiver or inte-
grated amp in Zone 2, use its volume control to adjust the
volume.
Muting Zone 2
m Operating with the remote controller
Press ZON E2 followed by MUTING.
• To unmute, press ZONE2 followed by MUTING again.
• Only analog input sources are output by the ZONE 2 LINE
OUT and FRONT HIGH OR FRONT WIDE OR ZONE 2
SPEAKERS L/R terminals. Digital input sources are not out-
put. If no sound is heard when an input source is selected, check
if it's connected to an analog input.
• While Powered Zone 2 is being used, listening modes that
require surround back speakers or front high speakers or front
wide speakers (6.117.1), such as Dolby Digital EX, DTS-ES,
THX Select2 Cinema, Dolby Pro Logic [Iz height, and
Audyssey DSX TM are unavailable.
• While Zone 2 is on, f-41 functions will not work.
• You cannot select different AM or FM radio stations for your
main room and Zone 2. The same FM/AM radio station will be
heard in each room. For example, if you have an FM station for
the main room, that station will also be used in Zone 2.
• Zone 2 can also be unmuted by adjusting the volume.
i ii
En
57