Manual

Advanced Setup
ED
38
@-
MENU
-- 2. SpeakerSetup
-- 3. AudioAdjust
-- 4. SourceSetup
-- 5. ListeningModePreset
-- 6. Miscellaneous
-- 7. HardwareSetup
-- 8. RemoteControllerSetup
-- 9. LockSetup
@ Input/Output Assign
(÷ 39)
(_) Miscellaneous (_ 50)
2. OSD Setup
(_) Speaker Setup (_ 40) (_) Hardware Setup
(÷ 5o)
ID_Z3.7.TunerHDMiHardwareSetup
@ Audio Adjust (_ 44)
(_) Remote Controller
Setup (_ 62)
( & RemoteController Setup
• Remote _
@ Source Setup (_ 45) @ Lock Setup (_ 52)
(_) Listening Mode Preset
(_ 49)
¢ - _:-_ook s;_l _- ........................
LQ_:k
.........; __i_U _::_:) i Remote indicator
-- RECEIVER
MT/_/_'- }
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into nine catego-
ries on the main menu.
Carry out the settings by using the on-screen display.
Press RECEIVER followed by SETUP.
The following menu appears.
MENU
2. Speaker Setup
& Audio Adjust
4. Source Setup
& Ustenlng Mode Preset
& Miscellaneous
7. Hardware Setup
& Remote Controller Setup
& Lock Setup
• ff the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
Use lit to select a menu, and then press ENTER.
Use lIT to select target and then press ENTER.
Use &IT to select option and -_l/_,-to change the
setting.
Press SETUP to close the menu.
Press RETURN to return to the main menu.
• This procedure can also be performed on the AV receiver by
using SETUP, arrow buttons, and ENTER.
• During Audyssey 2EQd_ Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear
in the Display.