Operation Manual

Audio
 Makesurethatthespeakersetupmicrophoneisnotstillconnected.
 Confirmthattheconnectionbetweentheoutputjackonthedeviceand
theinputjackonthisunitiscorrect.
 Makesurethatnoneoftheconnectingcablesarebent,twisted,or
damaged.
 IftheMUTINGindicatoronthedisplayflashes,pressMUTINGonthe
remotecontrollertounmutetheunit.
 WhileheadphonesareconnectedtothePHONESjack,nosoundis
outputfromthespeakers.
 Setto"Off"if"AudioSelect""PCMFixedMode"issetto"On".
Checkthefollowingiftheabovedoesnotfixtheproblem:
ThereisnosoundfromtheTV
Nosoundfromaconnectedplayer
Aspeakerproducesnosound
Onlythefrontspeakersproducesound
Onlythecenterspeakerproducessound
Thesurroundspeakersproducenosound
Thecenterspeakerproducesnosound
Nosoundfromthebackspeakersorheightspeakers
Thesubwooferproducesnosound
Volumeislow
Noisecanbeheard
ThesoundchangeswhenIconnectmyheadphones
AboutDTSsignals
ThebeginningofaudioreceivedbyanHDMIinputjackcannotbeheard
Troubleshooting