Operation Manual

Others
Strangenoisescanbeheardfromtheunit
 Ifyouhaveconnectedanotherunittothesamewalloutletasthisunit,
thisnoisemaybeaneffectfromtheotherunit.Ifthesymptomsimprove
byunpluggingthepowercordoftheotherunit,usedifferentwalloutlets
forthisunitandtheotherunit.
WhenperformingAutomaticSpeakerSetup,themeasurementfailsand
themessage"Ambientnoiseistoohigh."isdisplayed
 Thiscanbecausedbyamalfunctioninyourspeakerunit.Checkifthe
unitproducesnormalsounds.
TheLateNightfunctiondoesnotwork
 MakesurethesourcematerialisDolbyDigital,DolbyDigitalPlusor
DolbyTrueHD.
TheCinemaFilterfunctiondoesnotwork
 Thisfunctioncanbeusedinthefollowinglisteningmodes:DolbyDigital,
DolbyDigitalPlus,DolbyTrueHD,Multichannel,DSD,DTS,DTSES,
DTSNeo:6Cinema,DTS96/24,DTSHDHighResolutionAudio,DTS
HDMasterAudio,DTSExpress.
HowdoIchangethelanguageofamultiplexsource
 Select"Main"or"Sub"for"MultiplexInputChannel"in"3.AudioAdjust"
"Multiplex/Mono".
Powerconsumptioninstandbymode
 Inthefollowingcases,thepowerconsumptioninstandbymodemay
reachuptoamaximumof33W:
– When"HDMICEC(RIHD)"issetto"On".(DependingontheTV
status,theAVreceiverwillenternormalstandbymode.)
– The"HDMIStandbyThrough"settingissettootherthan"Off".
– The"PowerOutatStandbyforSTRMBOX"settingis"On".
Troubleshooting