Operation Manual

Video
There is no picture
Make sure that all video connecting plugs are pushed in all the way.
Make sure that each video component is properly connected.
If the video source is connected to a component video input, you must
assign that input to an input selector, and your TV must be connected to
COMPONENT VIDEO OUT terminal.
If the video source is connected to a composite video input, your TV must
be connected to the MONITOR OUT V terminal.
If the video source is connected to an HDMI input, you must assign that
input to an input selector, and your TV must be connected to the HDMI
output(s).
Make sure the switching of input screens is proper at the monitor side
such as a TV.
Images of a component connected to the composite video input terminal
can not be output by converting on the monitor of a TV or other
components connected to COMPONENT VIDEO OUT terminal.
When the TV image is blurry or unclear, power code or connection cables
of the unit may have interfered. In that case, keep distance between TV
antenna cable and cables of the unit.
There is no picture from a source connected to an HDMI IN
Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In
addition, video signals from a PC are not guaranteed.
The on-screen menus do not appear
On your TV, make sure that the video input to which this unit is connected
is selected.
When the AV receiver is not connected to a TV via HDMI OUT, on-screen
menus are not displayed.
Troubleshooting