Operation Manual

Resetting the unit
Problem may be solved by resetting the unit to initialize all the setting to
factory default. If you cannot resolve the issue from the procedure in trouble
shooting, try resetting the unit as explained below. If you reset the unit status,
your preferences will be reset to the defaults. Note them down before starting
reset.
Resetting method
1. While holding down CBL/SAT on the unit (Do not release this button until
step 2 is finished.)
2. Press ON/STANDBY on the unit. "Clear" is appeared on the display and
the unit will enter standby mode.
Resetting method of the remote controller
1. While holding down 1 RCV (Do not release this button until step 2 is
finished.).
2. Press and hold 2 HOME until the 3 remote indicator lights (about 3
seconds). Within 30 seconds, press 1 RCV again.
Troubleshooting