Operation Manual

Resetting the REMOTE MODE Buttons
You can reset a REMOTE MODE button to its default remote control code.
Note that only one REMOTE MODE button can be reset in this procedure.
1. Press HOME for 3 or more seconds while holding down the REMOTE
MODE button to which you want to program the remote control code.
The remote indicator lights.
2. Within 30 seconds, press the REMOTE MODE button again.
Reset is complete when the remote indicator flashes twice.
To reset the remote controller to its factory defaults: While holding
down RCV, press and hold down HOME for about 3 seconds until the remote
indicator lights. Press RCV again within 30 seconds. Reset is complete if the
remote indicator flashes twice.