Operation Manual

12. Bluetooth (Bluetooth Setup)
Bluetooth
Default Value: On
Enables/Disables the unit to pair with Bluetooth-enabled device.
"On": Enables the Bluetooth function and allows the unit to pair with
Bluetooth-enabled device. Set this function to "On" when configuring the
settings related to Bluetooth.
"Off": When not using the Bluetooth function.
Direct Change
Default Value: On
Automatically changes the input selector to "BLUETOOTH" when a
Bluetooth-enabled device is connected.
"On": To enable this function.
"Off": To disable this function.
When the input selector is not selected automatically, set this
function to "Off" and change the input selector manually.
Auto Reconnect
Default Value: On
Automatically reconnects to the Bluetooth-enabled device connected
last when you change the input selector to "BLUETOOTH".
"On": To enable this function.
"Off": To disable this function.
This function may not work depending on your Bluetooth-enabled
device.
Pairing Info
Default Value: -
This function initializes the information of a previous pairing information
stored in the unit.
Pressing ENTER when "Clear" is displayed initializes the pairing
information stored in this unit.
Advanced Settings