Operation Manual

"BD/DVD", "CBL/SAT", "STB/DVR", "GAME", "PC", "AUX", "TV/CD":
Input signal from components connected to the HDMI IN jack assigned
to each input selector is output to TV.
"Last": Input signal from the components connected to input selector
which was selected just before the unit enters the standby.
"Auto": Input signal from all components connected to HDMI IN jacks is
displayed on TV.
"Auto (Eco)": Input signal from all components connected to HDMI IN
jacks is displayed on TV. Selecting this setting when using CEC-
compatible TV, the power consumption on standby is reduced. You
cannot select this setting, when "HDMI CEC (RIHD)" is set to "Off".
When "HDMI Through" is set, the power consumption increases
even when the unit is on standby.
When making the change to this setting, turn off and then on again
the power of all connected components.
Audio TV Out
Default Value: Off
This function outputs the audio through the speakers of the TV
connected to HDMI with this unit turned on.
"On": When using this function
"Off": When not using this function.
When setting this function to "On", set "HDMI CEC (RIHD)" to "Off".
This function is fixed to "Auto", when setting "HDMI CEC (RIHD)" to
"On".
Listening mode cannot be changed while "Audio TV Out" is set to
"On" and audio is being output through the speakers of the TV.
Depending on your TV set or input signal of the component, audio
may not output through the speakers of the TV even if "Audio TV
Out" is set to "On". In such case, audio is output from the speakers
of the unit.
Operating the MASTER VOLUME control of the unit when "Audio TV
Out" or "HDMI CEC (RIHD)" is set to "On" and you are listening to
the audio through the speakers of your TV, outputs audio from the
unit. If you do not want to output audio from the unit, change the unit
or TV settings, or reduce the volume of the unit.
Audio Return Ch
Default Value: -
Connection to the ARC compatible TV using HDMI cable allows to listen
to the TV sound from the speakers connected to the unit. To use this
function, set "HDMI CEC (RIHD)" to "On" in advance.
"Auto": When using this function.