Operation Manual

11. HDMI Setup
HDMI CEC (RIHD)
Default Value: Off
Setting to "On" enables the input selection link and other link functions
with HDMI connected CEC compliant device.
"On": To enable this function.
"Off": When not using this function.
Depending on the TV set, a link may need to be configured on the
TV.
When this setting is set to "On", closing the on-screen menu displays
the name of the CEC-compatible devices and "RIHD On" on the
display.
When this setting is set to "On", power consumption in standby mode
may increase. (Depending on the TV status, the unit will enter the
normal standby mode.)
When this setting is set to "On" and you are listening to the audio
through the speakers of your TV, operating the MASTER VOLUME
control of the unit outputs audio from the speakers connected to the
unit. If you want to output audio from either of the unit or TV, change
the unit or TV settings, or reduce the volume of the unit.
If misbehavior occurs when this setting is set to "On", set this setting
to "Off".
When connecting a non-CEC compatible component, or when you
are not sure whether it is compatible, set the setting to "Off".
When making the change to this setting, turn off and then on again
the power of all connected components.
HDMI Through
Default Value: Off
Allows video signals from an AV component connected via HDMI to be
output to the TV independently of whether the AV receiver is on
standby. This setting is only valid for INPUT SELECTOR buttons
assigned to HDMI IN jack. You cannot set this setting to INPUT
SELECTOR button which is not assigned to any HDMI IN jack.
"Off": To disable this function. The input signal from any HDMI IN jacks
cannot be output to TV.
Advanced Settings