Operation Manual

When the "AM/FM Frequency Step (AM Frequency Step)" setting is
changed, all radio presets are deleted.
Auto Standby
Default Value: On/Off
This function places the unit on standby automatically after 20 minutes
of inactivity without any video and/or audio input.
"On": To place the unit on standby automatically. ("ASb" flashes on the
display.)
"Off": Not to place the unit on standby automatically,
"Auto Standby" is appeared on the display and menu screen 30
seconds before the Auto Standby comes on.
"Auto Standby" does not work when Zone 2 is active.
Default values vary depending on the regions.
HDMI Through
Default Value: Off
Enables/Disables the "Auto Standby" setting when "HDMI Through"
setting is on.
"On": Enable this function
"Off": Disable this function
This setting is fixed to Off when setting "Auto Standby" to "Off".
Version
Default Value: -
The current firmware version is displayed.
Update via USB
Default Value: -
Press ENTER to select when you want to update the firmware via USB.
You will not be able to select "Update via USB" if a USB storage
device is not connected or there is nothing to update in the USB
storage device.