Operation Manual

10. Hardware (Hardware Setup)
Volume OSD
Default Value: On
This function displays the volume level on the TV screen during volume
level adjustment.
"On": The volume level is displayed on TV screen.
"Off": The volume level is not displayed on TV screen.
Remote ID
Default Value: 1
Select an ID for the remote controller to be used with the unit from "1",
"2", and "3", and set it to differentiate this unit's remote controller from
those used with other Onkyo components when multiple components
are used in the same room.
If you change the ID on the unit, set the remote controller ID to the same
value accordingly to the procedure below.
1. While holding down RCV, press Q SETUP for about 3 seconds until
the remote indicator lights.
2. Press either 1, 2, or 3 using the number buttons. The remote
indicator flashes twice.
AM/FM Freq Step (North American and Taiwanese models)
Default Value: 10 kHz/
200 kHz
Select the frequency step according to your area.
Select from "10 kHz/200 kHz" or "9 kHz/50 kHz".
When the "AM/FM Frequency Step (AM Frequency Step)" setting is
changed, all radio presets are deleted.
AM Freq Step (European, Australian and Asian models)
Default Value: 9 kHz
Select the frequency step according to your area.
Select from "9 kHz" or "10 kHz".
Advanced Settings