Operation Manual

Configure the sound field settings for playing any 2 ch digital source
such as Dolby Digital, or 2-ch analog/PCM source in the Dolby Pro
Logic II Music listening mode. Allows you to configure the sound field
position forward or backward.
"-3" to "3": With "0" at the center, smaller the setting value is, more the
sound field moves forward, and larger the setting value is, more the
sound field moves backward.
Center Width (PLII Center Width)
Default Value: 3
Configure the settings to use for playing any 2 ch digital source such as
Dolby Digital, or 2-ch analog/PCM source in the Dolby Pro Logic II
Music listening mode. Allows you to configure the width of the sound
from the center speaker.
"0" to "7": Smaller the setting value is,the sound is gathered to the
center, and larger the setting value is, the sound is distributed to the
front left and right speakers.
Center Image (Neo:6 Center Image)
Default Value: 2
Allows you to configure the width of the front sound field when playing in
the DTS Neo:6 Music listening mode.
"0" to "5": Smaller the setting value is, the front sound field is gathered
to the center, and larger the setting value is, the front sound field is
distributed to the front left and right speakers.
Listening Angle
Default Value: Wide
Set the angle of the front left and right speakers relative to the listening
position when playing in the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
Values recommended for "Listening Angle" are 20° when "Narrow" is
selected, and 40° when "Wide" is selected.