Operation Manual

5. Sp Config (Speaker Configuration)
Allows you to change the speaker configuration such as existence of
subwoofer, crossover frequency, and so on.
Subwoofer
Default Value: Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front
Default Value: Small
Allows you to specify the size of the front speakers. Specify the size
according to a cone diameter.
"Small": When the cone diameter is less than 6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than 6-1/2 inches (16 cm)
The setting is fixed to "Large" if "Subwoofer" is set to "No".
Center
Default Value: Small
Allows you to specify the size of the center speaker. Specify the size in
accordance with the smallest cone diameter in the system.
"Small": When the cone diameter is less than 6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than 6-1/2 inches (16 cm)
"None": When the corresponding speaker is not used.
The setting cannot be selected "Large" if "Front" is set to "Small".
Surround
Default Value: Small
Allows you to specify the size of the surround speakers. Specify the size
in accordance with the smallest cone diameter in the system.
"Small": When the cone diameter is less than 6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than 6-1/2 inches (16 cm)
Advanced Settings