TX-NR636 AV RECEIVER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/txnr636upg/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections TV Personal computer HDMI IN HDMI OUT HDMI cable To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI OUT HDMI OUT HDMI OUT Game console 1 Set-top box/Digital video recorder, etc. Connecting the TV and players Important: The power cord must be connected only after all other connections are completed.
Step 1: Connections the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up". To enjoy HDCP2.2 protected video, connect the player to the HDMI IN3 jack and the TV to the HDMI OUT MAIN jack of the unit. Your player and TV need to support HDCP2.2. To play 4K or 1080p video, use the high speed HDMI cable. Another TV can be connected to the HDMI OUT SUB jack. To use the function to display the unit's setting screen on the TV, connect the TV to the HDMI OUT MAIN jack.
Step 1: Connections 2 8F Connecting speakers Surround back R/ Height R # Front R Surround back L/ Height L Front L $ Speaker layout If there is only one surround back speaker, connect it to the BACK or HEIGHT L terminal. Center F 9 ' 79 " # " & $ % 8 7 To enjoy the Dolby Atmos listening mode, Height speakers or Surround Back speakers need to be installed. The example above uses front Height speakers. As other types of Height speakers are also applicable, see the next page for details.
Step 1: Connections Characteristics of speaker types " # output front stereo sound. $ outputs center sounds such as dialogs and vocals. % & create back sound field. ' reproduces bass sounds and creates rich sound field. Connecting 78 speakers or 9F speakers enables playback in 7.1 ch configuration. 78 (surround back) speakers improve sense of envelopment created by back sound field as well as seamlessness of back sounds, providing more natural sound experiences in the sound field.
Step 1: Connections Using Dolby Enabled Speakers 3 Network connection Other connections AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception. You can enjoy Internet radio and DLNA by connecting the unit to LAN. The unit can be connected to the router with an Ethernet cable or to the wireless LAN router with Wi-Fi connection.
Step 2: Setting Up Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN jack of the unit via HDMI connection. 1 Turning the power on Connect the power cord to the outlet. Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" with the cursors and press ENTER. 3. When "Please plug microphone that came in a box with AV receiver." is displayed, connect the microphone to the SETUP MIC jack of the unit. settings. Press ENTER with "Save" selected. In the next screen showing that "AccuEQ Room Calibration" is "On", press ENTER on the remote controller.
Step 2: Setting Up 4th Step : Network Connection 2. Select and set the authentication method. The "Enter Password" screen, instead of the following screen, may be displayed automatically if the wireless LAN router does not have an automatic setting button. Initial Setup Network Connection Do you want to connect network connection? Wi-Fi Setup It gives you network services that our AV receiver support. If you wish to skip this step. Select the authentication method. select “No. Skip”. 3.
Step 3: Playing Back 1 Playing the player and TV Remote controller parts name 1 1 zRECEIVER button: Turns the unit on or into standby 2 3 mode. 2 RCV button: Switches the remote controller to the 8 mode for operating this unit. 3 REMOTE MODE/INPUT SELECTOR button: Switches the input to be played. 9 z To control the unit: The remote controller of this unit has the remote mode function for controlling other devices.
Step 3: Playing Back Listening modes You can select a listening mode from various options such as Dolby Atmos, Dolby Digital and DTS. Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games.
Step 3: Playing Back 3 Connecting and playing the Bluetoothenabled device You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is ~?& ! % It may take about a minute until connection is established when the unit is on since the Bluetooth function takes some time to start up. If the volume setting on the Bluetooth-enabled device is low, the sound will not be output from this unit.
Step 3: Playing Back 5 Using Quick Setup menu In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment. 1. Press Q SETUP on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. CBL/SAT Input BD DVD Audio CBL/SAT Video STB DVR Information GAME Listening Mode PC AUX 2. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
Step 3: Playing Back 6 Using the multi-zone function Making multi-zone connection Connecting an amplifier or receiver in another room You can multi-zone connect the unit with an integrated amplifier and speakers in a separate room and play sound from an external device connected to the analog audio input jacks of the unit, sound from the "NET", "USB" or "BLUETOOTH" source, and the AM/FM broadcasting.
Step 3: Playing Back Performing multi-zone playback 1. Press ZONE2 on the remote controller, point the remote controller at the unit and press zRECEIVER. "Z2" lights on the main unit display and the multi-zone function is enabled. (Zone 2 is now on.) 2. Press ZONE2 on the remote controller again and press INPUT SELECTOR of the input to be played in a separate room.
1 23 4 56 7 8 9 (European, Australian and Asian models) M F G H I J K L (European, Australian and Asian models) N O P Q R S T Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 8 9 standby mode. BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed. Wi-Fi indicator: Lights when the unit is connected to the wireless LAN router. ZONE 2 button: Controls the multi-zone function.
1 2 3 4 6 5 7 1 23 4 5 9 6 7 8 Display 1 Lights in the following conditions. "Z2": ZONE 2 output is (Taiwanese models) 8 9 F G H I "USB" and "NET" will flash if the connection is not correct. ¼ 2 Lights when headphones are connected. 3 Lights when NET or USB is controlled. 4 Lights according to the type of input digital signals and Rear Panel 1 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit.
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Specifications Amplifier Section Network Section Rated Output Power All channels: 95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC) 115 watts minimum continuous power per channel, 6 ohm loads, !#$ & ' * + + distortion of 0.
Others License and Trademark Information DISCLAIMER “MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC in the United States and other counties.” Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries.
Others Precautions – – For European Models – Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: – Safety – Limits and methods of measurement of radio disturbance characteristics – Limits for harmonic current emissions – Limitation of voltage changes, voltage fluctuations and flicker – RoHS Directive, 2011/65/EU – Hereby, Onkyo Corporation, declares that this TX-NR636 is in compliance with the essential requirements and other relevant provi
(Mainland) Europe Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/ The Americas 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.com/ 1301, 555 Tower, No.
Support for Spotify Connect Spotify Connect can be supported by updating the unit's firmware. Simply click the Connect icon and select the unit on the playback screen of Spotify application to enjoy high quality music streaming. To enable Spotify Connect, install the Spotify application on your smartphone or tablet first. Then, create a Spotify premium account. The Spotify software is subject to third party licenses found here: ¼ www.spotify.
Unterstützung für Spotify Connect Spotify Connect kann durch Aktualisierung der Firmware des Geräts unterstützt werden. Klicken Sie einfach auf das Symbol Connect und wählen Sie das Gerät auf dem Wiedergabe-Bildschirm der Anwendung Spotify, um hochqualitatives Musik-Streaming zu genießen. Zur Aktivierung von Spotify Connect, installieren Sie die Anwendung Spotify zuerst auf Ihrem Smartphone oder Tablet. Erstellen Sie dann einen Spotify Premium-Account.
