Manual

Using a Macro function
MODE MACRO
MODE buttons
Erasing a macro from the MODE MACRO button
1. Press and hold down the desired MODE button,
press the MODE MACRO button, and then release
both buttons.
When you press the MODE button, it lights green and the
SEND/LEARN indicator lights. When you press the MODE
MACRO button, the indicator turns off. When you release the
buttons, the indicator flashes once.
2. Press the MODE MACRO button again.
The SEND/LEARN indicalor flashes twice slowly. The macro
programmed to the MODE button pressed in Slep 1 above is
erased.
Notes:
• If no button is pressed for more than 30 seconds during the
erasing procedure, the SEND/LEARN indicator flashes three
times quickly, and the remole controller exits the erasing mode.
Resume from Step 1.
• Be awm'e that if you press a button olher than MODE MACRO
button in Step 2, then you will in effect be overwriting the
previous macro with a new macro.
DIRECT
MACRO
g
®®@
u
o_rl_qo
MODE buttons
Erasing a direct macro from the DIRECT
MACRO button
1.
Press and hold down any one of the eight MODE
buttons, press the DIRECT MACRO button, and then
release both buttons.
When you press the MODE button, it lights green and the
SEND!LEARN indicator lights. When you press the DIRECT
MACRO button, the indicator turns off. When you release the
buttons, the indicator flashes once.
2. Press the DIRECT MACRO button again.
The SEND/LEARN indicalor flashes twice slowly. The macro
programmed to the DIRECT MACRO button is erased.
Notes:
• If no button is pressed for more than 30 seconds during the
erasing procedure, the SEND!LEARN indicator flashes three
times quickly, and the remote controller exits the erasing mode.
Resume from Step 1.
• Be aware lhal if you press a button other Ihan DIRECT MACRO
button in Step 2, then you will in effect be overwriting the
previous direct macro with a new direct macro.
68