Manual

Using remote controller
operation
buttons
Numeric keys
SEARCH
I Controlling an Onkyo player
DVD
The R I connector of the Onkyo DVD player must be connected Io
the TX-DS898 (see page 14).
1. Press the DVD MODE button.
The DVD MODE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons thai can be used Io control an Onkyo DVD player.
Operation buttons:
ON: Turns the DVD player on and off
STDBY: Turns the DVD player off. (Some sets may not respond 1o
this button. In this case, use the ON button Io put the DVD player in
the standby state.)
SETUP: Displays the menu
_/v/</_>: Moves Ihe cu_sor
ENTER: Confirms the selection
RETURN: Return button
TOP MENU or MENU: Displays the menu screen(s) recorded on
DVD media.
DISC +1=: Selects a disc in the DVD changer.
AUDIO: Press repeatedly 1o select an audio and!or language track
recorded on a DVD-Audio/Video.
ANGLE: Press repealedly 1o select a camera angle when a DVD-
Video is recorded with multiple angle playback.
SUBTITLE: Press repeatedly Io select one of the subtitle languages
recorded on a DVD-Video.
SEARCH: Press to find the specific section on a disc where you
want Io start playback.
RANDOM/R: Press Io start random playback.
[;_: Chapterffrack down
_: Chapterffrack up
IS>: Play
D: Stop
<33: Fast reve_se
C2>: Fast forwm'd
@: Pause
OPEN/CLOSE m.: Open/close the disc tray
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL _/?: Adjusts the volume at the TX-DS898
MUTING: Activates the muting function at the TX-DS898
Note:
When operating an OnkyoDVDpiayer directly with the remote
controller without connecting theRIterminals, pre-programming is
necessary (see page 59).
57