Manual

Preference
4-2. Headphones Level Setup sub-menu
You can use this sub-menu to adjust the volume oulput from the
headphones so that it matches the level output from the speakers.
The headphone volume can be adjusted between -12 and +12
decibels.
:Advanced Menu
4.Preference
4-2.HeadphoneLevel Setup
a.Headphones Level
0dB_
Quit:ISETUP 1
[H_ adPhones L<.'J ?
4-3. OSD sub-menu
Setup
This sub-menu allows you to customize the OSD Setup menu to
display in the manner you desire.
Advanced Menu
4.Preference
4-_3.OSD Setup
a. Baokground Color
:Bluel
h. Superimpose Mode
:Normal_
c. Immediate Display
:On
d.Display Position
:Bottom_
[_ Quit:ISETUP I
Hint:
If this is set to "Off," the background color will not be displayed
even when there is no video signal input.
d. Display Position
Use this setting Io select the position of the immediate display that
appears when certain operations are performed. You can position the
immediate display al any of ten different levels ranging from the top
all the way Io the bottom.
4-4. OSD Position sub-menu
This sub-menu allows you to adjust the position of the OSD Setup
menu as it is displayed on your screen. Depending on the monitor
used, there may be cases where the OSD Setup menu is not displayed
in the center and parts of the menus are cut off, To adjust the position
of the OSD Setup menu, simply press the cursor buttons to inch the
menu Io position you desire.
=Advanced Menu
4.Preference
4-4.OSD Position
Exit:[RETURN I
a. Background Color
Select either Bluel, Blue2, Greenl, Green2, Magenta, Redl, or
Red2 as the background color while the OSD Setup menu is
displayed.
b. Superimpose
Off: Select to have the OSD Setup menu displayed on the
selected background color.
Normal: Select to have the OSD Setup menu superimposed over
the current video if one is displayed or on the selected
background color if there is no video signal.
Black: Select to have the OSD Setup menu displayed on a black
background at all times.
c. Immediate Display
On: Select this to have the screen immediately display certain
operations as you perform them. The display will remain for a
few seconds after the operation is completed.
Off: Select this Io turn off the immediate display of operations.
VIDEO 1
45