Manual

Audio Adjust
3. Audio Adjust Setup menu
Set the various parameten_ for the sound signals.
Advanced Menu
3.Audio Adjust
l.Tone Control
2.Surromnd Speakers
3.Sound Effect
4.Delay
5.LFE Level
6.Mono Setup
7.Theater Dimensional
8.Surround Setup
[3.Rodio OdJoN_
Advanced Menu:
3.Audio Adjust
9.THX Setup
10.Hono Movie Setup
ll.Enhanced 7 Setup
12.Orchestra Setup
13.Unplugged Setup
14.Studio Mix Setup
IS.TV Logic Setup
-_default
I $" Rudio Rddu_
3-1. Tone Control
Separately adjust the bass and treble settings as desired in 2-decibel
units
Advanced Menu
3.Audio Adjust
3-_l.ToneControl
a.Bass 0
b.Treble 0
_[_ Quit:ISETUP I
ITone Con%_oi?
Parameter Setting
Initial value
a Bass --12 to +12 0
b Treble --12 to +12 0
3-2. Surround Speakers
This setting allows you to decide which speakers to output to when
surround back speakens are connected and you are playing back a
5. l-channel source.
Parameter Setting
Initial value
a Surround Speakers Surround L/R, Surround Back, Surround L/R
Surf L/R + Back
Surround L/R: This outputs the sound to the sun'ound left and
right speakers as normal and outputs nothing to the surround
back speaker.
Surround Back: This outputs the sound to the sun'ound back
speakers and outputs nothing to the surround left and right
speakers.
Sat L/R+Back: This omputs the sound to bolh the sun'ound leh
and right speakers and the sun'ound back speaker.
3-3. Sound Effect
Turn on and off the various sound effects.
Parameter Setting
Initial value
a RE-EQ On, Off Off
b Upsampling On, Off Off
c Subwoof_r On, Off On
(AnWPCM)
d Late Night Off, Low, High Off
a) Re-EQ
Re-EQ (re-equalization) takes the edginess or "brightness" out of
yore" home cinema sound to compensate for the fact that sound
mixed for theaters may sound too bright when played back through
speakers in the home environment.
This can be set to either "On" or "Oft'."
b) Upsampling
Upsampling processes the input digital signal, or the digital signal
converted from an analog input source, and converts its digital
sampling frequency to twice its current frequency for an even further
detailed sound reproduction. This can be set to either "On" or "Off."
When "On" is selected, the Unsampling indicator lights.
c) Subwoofer
When "Yes" is selected for the Subwoofer setting in the Speaker
Config sub-menu, set this to "Off" if you do noi want to have sound
output from the subwoofer. This seuing is only effective when the
input source is Analog/PCM. If "No" is selected for the Subwoofer
selling in the Speaker Config sub-menu, then this setting will not
appear.
d) Late Night
Cinema sound has a vast dynamic range; therefore, to hear the
quieter sounds such as human convensations, they must be played
back at larger volumes. When this parameter is set to "High" or
"Low," the dynamic range of the sound is narrowed down to allow
you to easily hear minute sounds at low volumes, This function is
especially useful if you wish to play a movie at low volumes during
the nighltime.
This can be set 1o either "Off" or "Low," or "High."
When this parameter is set 1o High or Low, the dynamic range of the
sound is narrowed down to allow you to easily hem" minuto sounds at
low volmne.
Notes:
• The Late Night function is effective only on Dolby Digital
encoded sohware.
• The depth of the Late Night effect is determined by Dolby
Digital software. Some sounds may produce no or little effect.
4O