User Manual

9
En
Step2: Connect an external device
1. DIGITAL IN connection
Connect an external device with a digital optical cable or
digital coaxial cable. Note that this unit is equipped with an
"Opt1Wkup feature" so that when play starts on an external
device connected to the OPTICAL 1 (GAME) terminal, this
unit comes on and the INPUT SELECTOR automatically
changes. (P33)
0 The default setting for "Opt1Wkup feature" is "Off". To
enable this function, please press SETUP on the remote
controller, and set "3. Hardware" - "Opt1Wkup". (P33)
0 The Opt1Wkup feature does not work when the unit is in
the mode for controlling ZONE 2 (P27).
0 Only PCM audio is supported for input through the
DIGITAL IN OPTICAL/COAXIAL jacks. Set the audio
output on the external device to output PCM.
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
GAME
b
a
BD/DVD
a Digital Optical Cable, b Digital Coaxial Cable
SN29403233A_TX-8260_En.book 9 ページ ２０１７年１０月１７日 火曜日 午後２時４５分