Owner's Manual

Red LED (continuously on when powered, blinking during RF reception)

16 IDs and 4 CHs

4 outputs for mono cable and IR emitters

Possibility to have multiple RF Receiver in one home not interfering Po-

sitioning: freestanding, mounted horizontally or hanging up side down

4.5 x 3.2 x 1.2 inch (113 x 81 x 30 mm)

32 ˚F to 122 ˚F (0 ˚C to 50 ˚C)

Operating distance: 16 feet (5 meters)

IR frequency range: DC/flash codes, 36kHz-550kHz

Operating distance: approximately 100 feet (30 meters) depending on the

surrounding conditions

Frequency: 433.92 MHz

1/8 inch (3.5 mm) mono male to male

cable length: 7 feet (2.0 meters)

Number of IR emitters : 3

1/8 inch (3.5 mm) mono mini-plug

Cable length: 7 feet (2.0 meters)

Max. range: 3 feet (75 cm)

120V AC Power adapter (for USA and Canada)

230V AC Power adapter (for Europe and Australia)

Mounting kit (Plate and 4 screws)

The device complies with part 15.19(a)(3) of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may

not cause harmful interference and (2) this device must accept any inter-

ference received including interference that may cause undesired opera-

tion.

Specifications

The specifications and design of this product are subject to change without notice.

Hardware

Dimensions

Operating temperature

IR frequency range

Radio frequency (RF)

Cable

IR emitters

Accessories

Approvals