Owner's Manual

Other Information
63
Configuring Various Settings
Changing the remote control code
to resolve conflicts
When you use multiple NC-500s, you can change
the remote control code to avoid multiple Onkyo
products from operating simultaneously with one
remote controller.
1. Activate menu mode.
Press the SETUP button to display the setup
items in the display area.
2. Select the System setting menu.
Press the Cursor / button repeatedly to
display “System” in the display area.
You are presented with the following menu
items in this order: Clock, Server, iNet Radio,
FM Radio, AM Radio and System.
Press the SELECT button.
3. Press the Cursor / button to display
“Remote ID” in the display area.
Press the SELET button.
NC-500 Remote controller
SETUP
4. Press the Cursor / button to change
the remote ID.
Press the SELECT button to save the change.
To return to normal display, press the SETUP
button.
Tips:
Make sure to use the same remote ID as the one
for the remote controller (see page 17). If the
remote IDs do not match between the NC-500 and
remote controller, the NC-500 will not work
properly when operating with the remote
controller.