Owner's Manual

Other Information
57
Configuring Various Settings
Network Settings
Before you can use the NC-500 to play music contained in the music library on the Net-Tune server and
listen to Internet radio, you must correctly configure the NC-500’s network settings so that it can
connect to your LAN and the Internet.
It is strongly recommended to use a broadband connection (via an xDSL or CATV leased line) and a
router. If you are connected to the Internet via a narrowband dialup connection, you may not be able to
enjoy Internet radio as you expect or at all.
Before setting up the NC-500, make sure that you are already using a router that provides Internet
access and that the NC-500 is correctly connected with your router or hub via a LAN cable.
For more information on Internet connectivity, consult with your ISP (Internet Service Provider) or
refer to the documentation of your router.
System Ethernet Setting IP Address
Remote ID Select Remote ID
Display Standby
On Screen Display Background Color
Specify screen saver Screen Saver
Proxy Setup
Client
DHCP
IP Address
IP Mask
Gateway
IP DNS 2
Proxy On/Off
Port No
Proxy Address
Client Name
Wakeup on LAN
MAC address
IP DNS 1
Turn ON/OF DHCP
Specify IP Address
Specify Net mask
Specify Gateway
address
Specify IP DNS 1
address
Select background
color
Specify Standby
mode
Specify IP DNS 2
address
Turn On/Off Proxy
Specify Port number
Specify Proxy
Address
Specify Client name
Able/Disable
Wakeup on LAN
Specify MAC address
NetTune port
Specify NetTune
port number