Owner's Manual

48
Using timer functions
Turning on or off the alarm
function
You can turn on or off the alarm function.
1. Activate menu mode.
Press the SETUP button to display the setup
items in the display area.
Press the SELECT button.
2. Press the Cursor / button to display
“Alarm On/Off” in the display area.
Press the SELECT button.
4. Press the Cursor / button to select
“On” or “Off”.
5. Press the SELECT button to save the
change.
To return to normal display, press the SETUP
button.
NC-500 Remote controller
SETUP
Turning off the timer function
Press the STANDBY button either on the NC-500
or the remote controller, and then the NC-500 is
turned off.
If you press the DISPLAY button instead of the
STANDBY button, the timer function is disabled
and the NC-500 remains to be turned on.
Snooze feature
While the timer playback works, the NC-500
provides a snooze feature that temporarily
silences the alarm and sounds the alarm again
after 5 minutes.
Enabling the snooze feature
Pressing the SELECT button while the timer is
operating puts the NC-500 into snooze standby
mode.
After 5 minutes, the snooze feature sounds the
alarm again.