User Manual

33
> Specifications > Advanced Setup > Listening Modes > Network Functions
Troubleshooting Supplementary Information, etc�|
> Basic Manual
Front Speakers Bi-amp Connection
It is possible to connect front speakers supporting biamping
to improve quality of the bass and treble. Bi-Amping
compatible speakers need their terminals for the tweeters
connected to one amplifier and their terminals for woofers
connected to another amplifier, so it is not possible to
connect height speakers and surround back speakers
with this connection. Other than front speakers, you can
also connect a center speaker, surround speakers, and a
powered subwoofer.
•
If you connect to speakers supporting Bi-Amping,
speaker output in ZONE is not possible.
1. Connect front speakers compatible with Bi-Amping connection to
the FRONT jacks and the SURROUND BACK or HEIGHT jacks.
Make sure you remove the jumper bar fitted between the woofer
jacks and tweeter jacks of the front speakers. In case of Bi-Amping
connection, refer to the instruction manual of your speakers.
For high-frequency
For low-frequency
2. Change the setting on the screen of "2. Speaker" -
"Configuration" in the Setup menu.