User Manual

30
> Specifications > Advanced Setup > Listening Modes > Network Functions
Troubleshooting Supplementary Information, etc�|
> Basic Manual
1. Connect the and speakers as shown below
using the FRONT terminals and SURROUND BACK or
HEIGHT terminals.
2. Change the setting on the screen of "2. Speaker" -
"Configuration" in the Setup menu.
■ Top Rear
Install the Front speakers and Top Rear
speakers as shown in the figure to enjoy the Dolby Atmos
listening mode. Install Ceiling Speakers or such other
speakers as Top Rear speakers so that they are positioned
around the middle of just above the listening position and
just above the surround back speakers.
1. Connect the and speakers as shown below
using the FRONT terminals and SURROUND BACK or
HEIGHT terminals.
2. Change the setting on the screen of "2. Speaker" -
"Configuration" in the Setup menu.