Operation Manual

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

To ARC TV

If the TV supports the ARC (Audio Return Channel) function (*), use only the

HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the

TV for connection. You connect the HDMI cable to the port labeled OUT on the

receiver side.

• If a 4K high-quality video is played, use a Premium High Speed HDMI Cable

or Premium High Speed HDMI Cable with Ethernet whose package has a

"PREMIUM Certied Cable" label.

Setup

• Settings are required to use the ARC function. Select "Yes" for "2. ARC Setup"

in Initial Setup (

p83). If "No, Skip" is selected, settings are required in the

Setup menu after Initial Setup is completed. Press

on the remote controller,

and set "5. Hardware" - "HDMI" - "Audio Return Channel" to "On". (

p78)

• For detailed settings for TV connection, CEC function and audio output, refer

to the instruction manual of the TV.

(*) ARC function: This function transmits the audio signals of the TV via an

HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-

compatible TV is complete with one HDMI cable. To check if the TV supports the

ARC function, refer to the instruction manual of the TV, etc.

a HDMI cable