5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ What’s in the box Additional Function (Firmware Update) Update Information of the firmware Operation of added new functions Firmware Update Procedure Part Names Front Panel Display Rear Panel Remote Controller Speaker/Subwoofer 4 5 5 5 6 8 8 10 11 13 14 Connecting speakers Speaker Installation Speaker Connections and "Speaker Setup" Settings Speaker combinations Connecting the TV To ARC TV To Non-ARC TV Connecting Playback Devices Connecting an AV Component w
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Layouts and Selectable Listening Modes Listening Mode Effects Input Formats and Selectable Listening Modes Setup Setup Menu Menu list Menu operations 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ What’s in the box 1. Main unit (HT-R398) (1) 2. Remote controller (RC-970R) (1), Batteries (AAA/R03) (2) 3. Indoor FM antenna (1) 4. AM loop antenna (1) 5. Front speaker (SKF-398) (2) 6. Center speaker (SKC-398) (1) 7. Surround speaker (SKR-398) (2) 8. Subwoofer (SKW-398) (1) 9. Speaker cable (10' (3 m)) (4) 10. Speaker cable (26' (8 m)) (2) 11. Non skid pad (20) • When installing front speakers, center speaker, or surround speakers on a rack, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one. In such a case, new functions may be added from the start.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Firmware Update Procedure Update 1. Connect the USB storage device to your PC. 2. Download the firmware file from the our company's website to your PC and unzip. Firmware files are named as below. ONKAVR_.zip Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. 3. Copy all unzipped files and folders to the root folder of the USB storage device. • Make sure to copy the unzipped files. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connect the USB storage device to an external power source if it has its own power supply. • -51: The firmware file is for another model, or the firmware file is corrupted. Retry from the download of the firmware file. • Others: After removing the power plug once, insert it to the outlet, and then start the operation from the beginning. 6. Select "6. Miscellaneous" - "Firmware Update" - "Update via USB" with the cursors in order, then press ENTER. Setup 1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Part Names Front Panel ❏❏ For details, see ( 8 p9) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. ON/STANDBY button 2. MUSIC OPTIMIZER button: Turns on/off the MUSIC OPTIMIZER function that improves the quality of the compressed audio. 3. BLUETOOTH indicator: Lights up when this unit and a BLUETOOTH-enabled device are connected. 4. DOLBY ATMOS indicator: Lights up when Dolby Atmos signals are reproduced in appropriate listening mode. 5. Remote control sensor: Receives signals from the remote controller.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Display 1 2 3 4 5 6 7 1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. 2. Displays the audio output destination. A: Outputs audio only to the main room (ZONE A). B: Outputs audio only to the separate room (ZONE B). AB: Outputs audio to both the main room (ZONE A) and separate room (ZONE B). 3. Lights in the following conditions. : Headphones are connected. : Connected by BLUETOOTH.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Rear Panel ❏❏ For details, see ( 11 p12) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a TV. 3. HDMI IN jacks: Transmit video signals and audio signals with an HDMI cable connected to an AV component. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Remote Controller 1. ON/STANDBY button 2. Input selector buttons: Switches the input to be played. 3. Play buttons: Used for playback operation of a BLUETOOTH-enabled device. If the unit is switched to "CEC MODE" using the MODE button, an HDMI CEC function-enabled AV component can be operated. (Depending on the device, operation may not be possible.) 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker/Subwoofer Front Speakers/Surround Speakers Included front speakers and surround speakers can be used for both left and right side. The sound quality does not differ when used for left or right side. The grill net cannot be removed. or fall over by losing balance and may cause an injury. 4mm 1. Wall mount hole: the speaker system may be mounted to a wall by suspending speakers on wooden screw using the wall mount hole.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Center Speaker The grill net cannot be removed. 4mm 1. Speaker jack: use the included speaker cable to connect to the main unit. 2. Wall mount hole: the speaker system may be mounted to a wall by suspending speakers on wooden screw using the wall mount hole. • Wooden wall mount screw is not included. Please consult with a construction service personnel and prepare screw considering its type, material, and length so it provides sufficient support.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Subwoofer 1. Speaker jack: use the included speaker cable to connect to the main unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Notice Maintenance • Do not place objects on the speaker system. The speaker system may drops or fall over by losing balance and may cause an injury. • Do not place on a shaky platform, sloping surface, or other unstable place. The speaker system may drop or fall over by losing balance and may cause an injury. • Please select an installation site that has stable floor.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (ZONE B Connection) Connecting Antennas Connecting the Power Cord 19 29 32 34 35 36 18 Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment. You can check the connection method and default settings. Use height speakers? Yes • 3.1.2 Channel System ( No p27) • 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Installation 5.1 Channel System 2 5 6 This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals. Surround speakers create the back sound field. Subwoofer reproduces the bass sound, and creates the rich sound field.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3.1.2 Channel System A 3.1.2 Channel System is a speaker layout consisting of a 3.1 Channel System that includes front speakers, center speaker and subwoofer, and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Front High Speakers Installation Example 4 3´ (0.9 m) or more 3 2 6 This is a 3.1-channel system consisting of front speakers, a center speaker, and a subwoofer, with the installation of front high speakers, a type of height speaker. Installing the height speakers will enrich the sound field feeling in the upper space. Front high speakers should be situated at least 3'/0.9 m higher than the front speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Ceiling Speakers Installation Example 2 6 This is a 3.1-channel system consisting of inclueded front speakers, a center speaker, and a subwoofer, with the addition of top middle speakers sold separately, a type of height speaker. Installing the height speakers will enrich the sound field feeling in the upper space. Fit top middle speakers on the ceiling directly above the listening position.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example 4* 2* 6 5 Separately sold Dolby-enabled speakers have been selected as the height speakers for this system. Dolby enabled speakers are special speakers designed to face the ceiling, so that the sound is heard from overhead by bouncing the sound off the ceiling. Place Dolby enabled speakers (front) above the front speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Connections and "Speaker Setup" Settings Connections (Note) Speaker Impedance When using the included speakers, setup explained in this section is not required. When using speakers sold separately, use speakers with impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance" to "4 ohms" for "Speaker Setup" in the Initial Setup section ( p83).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1 Channel System 2 6 5 "Speaker Setup" settings during Initial Setup ( p84) 1 Speaker Setup Speaker Channels 4 5.1 ch Subwoofer Yes Height Speaker --- 3 Select how many speakers you have. • • • • This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation" ( 26 p20). ENTER Next Speaker Channels: 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3.1.2 Channel System 4 2 6 3 5 "Speaker Setup" settings during Initial Setup ( p84) 1 Speaker Setup Speaker Channels 3.1.2 ch Subwoofer Height Speaker Yes Front High Select how many speakers you have. ENTER Next • Speaker Channels: 3.1.2 ch • Subwoofer: Yes • Height Speaker: Select the type of height speaker actually installed. • Speaker Impedance: Set any value ( p25) This is a combination of the 3.1 Channel System and front high speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker combinations Speaker Channels FRONT CENTER SURROUND HEIGHT SUBWOOFER 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit. Connection with the TV differs depending on whether the TV supports the ARC (Audio Return Channel) function or not. The ARC function transmits the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection. You connect the HDMI cable to the port labeled OUT on the receiver side. • If a 4K high-quality video is played, use a Premium High Speed HDMI Cable or Premium High Speed HDMI Cable with Ethernet whose package has a "PREMIUM Certified Cable" label.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an AV Component in a Separate Room (ZONE B Connection) Connecting a Pre-main Amplifier (ZONE B) While performing playback in the main room (ZONE A), you can enjoy 2-ch audio of the same source in the separate room (ZONE B) at the same time. Use an analog cable to connect the ZONE B LINE OUT jack of this unit and the LINE IN jack of the pre-main amplifier in the separate room. a LINE IN Premain Amp.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the Power Cord Connect the power cord after all the connections are completed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playback AV Component Playback BLUETOOTH® Playback Listening To the AM/FM Radio ZONE B Playback Convenience functions Listening Mode 38 39 40 45 47 50 37 Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Press the input selector whose name is the same as that of the jack to which the player is connected. For example, press BD/DVD to play the player connected to the BD/DVD jack.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ BLUETOOTH® Playback You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone. Basic Operations Perform the following procedure when this unit is on. Pairing 1. When you press the BLUETOOTH button, "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled. 2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled device, and then select this unit from among the devices displayed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1. Press TUNER repeatedly to select either "AM" or "FM". 2. Press MODE repeatedly to display "TunMode: Auto" on the display. 3. When you press the cursors / , automatic tuning starts, and searching stops when a station is found.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p41). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure. 1. Press MEMORY so that the preset number on the display blinks. 2. While the preset number is blinking (approx. 8 seconds), repeatedly press the cursors / to select a number between 1 and 40. 3. Press MEMORY again to register the station.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select the preset number to delete. 3. After pressing MEMORY, press CLEAR while the preset number is blinking, and delete the preset number. When deleted, the number on the display disappears.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Using RDS (European, Australian and Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM radio signals. In regions where RDS can be used, when you tune in to a radio station broadcasting program information, the radio station name is displayed on the display. When you press on the remote controller in this state, you can use the following functions. • If no stations are found, the message "Not Found" is displayed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B Playback While performing playback in the main room (ZONE A), you can enjoy the audio of the same source in the separate room (ZONE B) at the same time. Playing Back 1. Press ZONE A/B to select an audio output destination. • ZONE A: Outputs audio only to the main room (ZONE A). "A" on the display of the main unit lights up. • ZONE B: Outputs audio only to the separate room (ZONE B). "B" on the display of the main unit lights up.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ If "ZONE A+B" is selected as an audio output destination, you can select only the "Stereo" listening mode for the main room (ZONE A) when using the 2.1ch speaker layout. When using a speaker layout of 3.1ch or more, you can select only the "AllCh Stereo" listening mode.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Convenience functions Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH-enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. • For audio playback, you can select an input selector to which video input is not assigned, such as "CD", "TUNER", and "BLUETOOTH". • When "OSD Language" ( p68) is set to Chinese, the audio from "BLUETOOTH" cannot be played.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Adjusting the tone Adjusting TREBLE/BASS You can adjust the sound quality of the front speakers. 1. Press TREBLE or BASS to select the setting to adjust. TREBLE: Enhances or moderates the high-tone range of the front speakers. BASS: Enhances or moderates the low-tone range of the front speakers. 2. Press + or - for adjustment. Adjusting VOCAL Emphasizes movie lines and music vocals to listen to them more easily. It is effective to movie lines in particular.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press SLEEP button on the remote controller to select the time from "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode. You can also set this by pressing the button on the remote controller and selecting "5. Hardware" - "Power Management" - "Sleep Timer" ( p79) on the Setup menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode by pressing STEREO, MOVIE/TV or MUSIC. Selecting a Listening mode 1. Press one from among STEREO, MOVIE/TV and MUSIC during playback. 2. Press the selected button repeatedly to switch the modes displayed on the display of the main unit. • Each of STEREO, MOVIE/TV and MUSIC buttons stores the listening mode that was selected last.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Checking the input format and listening mode Pressing button on the remote controller or INFO button on the main unit repeatedly will switch the display of the main unit in the following order. • When using a BLUETOOTH connection, press the INFO button on the main unit. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format The display is switched in a few seconds.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch DD (Dolby Audio - DD) (*1) (*1) (*1) DD+ (Dolby Audio - DD+) (*1) (*1) (*1) (*1) (*1) DTHD (Dolby Audio - TrueHD) (*1) (*1) (*1) (*1) (*1) (*2) Atmos Atmos 2.0/2.1 Atmos 3.0/3.1 Atmos 4.0/4.1 Atmos 5.0/5.1 Atmos 2.0.2/2.1.2 Atmos 3.0.2/3.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening mode Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode Effects Updating of listening modes Listening modes such as Atmos 2.0 and DSur 2.0 are added when the firmware is updated after purchase or the firmware is switched in the product production process. For details of firmware update, see "Additional Function (Firmware Update)" ( p5). (Firmware version supporting Atmos 2.0, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ format for DVD-Video and Blu-ray Discs. It is possible to record a maximum of 5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, one center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer). • To enable transfer of this audio format, connect via a digital cable and set audio output on the player to Bitstream output. –– –– DSur 4.0/4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ DTS-HD MSTR (DTS-HD Master Audio) bass region (sound elements for the subwoofer). The content is recorded with a rich volume of data, with a maximum sampling rate of 48 kHz, at a resolution of 24 bits and a bit rate of 1.5 Mbps. • To enable transfer of this audio format, connect via a digital cable and set audio output on the player to Bitstream output. This mode faithfully reproduces the sound design recorded in the DTS-HD Master Audio audio format.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Studio-Mix • To enable transfer of this audio format, connect via an HDMI cable and set audio output on the player to Bitstream output. This mode is suitable for rock or pop music. This mode creates a lively sound field with a powerful acoustic image as if you are at a club or rock concert.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Formats and Selectable Listening Modes You can select a variety of listening modes according to the audio format of the signal to be input. • Selectable listening modes with the STEREO button are Stereo and AllCh Stereo only. • List of listening modes selectable with the MOVIE/TV button ( p58) • List of listening modes selectable with the MUSIC button ( p61) • Selectable listening modes when headphones are connected are Mono, Direct, and Stereo only.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Multich PCM Direct Input Format Atmos*1 Listening Mode DSur TV Logic*4 DTS Virtual:X*2 *3 Full Mono AllCh Stereo*5 TV Logic T-D Full Mono*5 *4 A center speaker or surround speakers need to be installed. Cannot be selected if "Speaker Virtualizer" is set to "Off". Cannot be selected when height speakers are installed. Surround speakers or height speakers need to be installed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Direct DTS Express Direct DTS-HD MSTR Direct DTS DTS Express *1 *2 DTS Neural:X DTS Virtual:X TV Logic *2 *3 *4 *5 *6 *7 *3 DTS Neural:X *4 *5 DTS Virtual:X TV Logic *6 AllCh Stereo *1 DTS-HD MSTR*1 *2 *1 *2 Full Mono*7 Full Mono*7 T-D*4 T-D*4 Cannot be selected when the input format is 2 ch.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode DTS:X Direct DTS:X DTS Virtual:X *1 *2 TV Logic MUSIC button Input Format Listening Mode Analog Direct *4 Stereo Multich*1 DSur DTS Neural:X DTS Neural:X DTS Virtual:X*2 *3 DTS Virtual:X*1 *2 T-D*1 *3 Direct DSur Full Mono*4 *2 Listening Mode Multich PCM Stereo *3 AllCh Stereo*4 *1 Input Format Orchestra*4 Orchestra*3 Cannot be selected if "Speaker Virtualizer" is set to "Off".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode DSD Direct Input Format DD Stereo Listening Mode DD DSD DSur *4 *5 *6 Atmos*1 DSur Orchestra*3 DTS Virtual:X*3 *4 Unplugged*3 Unplugged*3 Orchestra Studio-Mix Studio-Mix*3 *5 *3 Unplugged*5 AllCh Stereo*4 Studio-Mix*5 Full Mono*4 *6 *1 *2 *3 *4 DD+ Full Mono*4 *1 *2 *3 *4 Cannot be selected when the input format is 2 ch. A center speaker or surround speakers need to be installed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Direct DTS Express Direct DTS-HD MSTR Direct Stereo Stereo DTS DTS Express *1 *2 DTS Neural:X DTS Virtual:X Orchestra *2 *3 *4 *5 *6 *7 *3 DTS Neural:X *4 *5 DTS Virtual:X Orchestra *6 Unplugged *1 Stereo *3 DTS Neural:X*3 *4 *5 DTS Virtual:X*4 *5 *6 Unplugged Unplugged*6 Studio-Mix*6 Studio-Mix*6 Studio-Mix*6 AllCh Stereo*7 AllCh Stereo
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode DTS-ES Direct Stereo DTS DTS Neural:X DTS Virtual:X*1 *2 Orchestra*3 Unplugged*3 Studio-Mix*3 AllCh Stereo*4 Full Mono*4 *1 *2 *3 *4 Cannot be selected if "Speaker Virtualizer" is set to "Off". Cannot be selected when height speakers are installed. Surround speakers or height speakers need to be installed. A center speaker, surround speakers, or height speakers need to be installed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations". ( p67) 1. Input/Output Assign 1. TV Out / OSD 2. HDMI Input 3. Digital Audio Input 4. Analog Audio Input Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. Change input assignment between the input selectors and HDMI IN jacks.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Hardware 1. HDMI 2. Bluetooth 3. Power Management Change the settings for the HDMI functions. Change the settings for the Bluetooth function. Change the settings for the power-save function. p77 p78 p79 6. Miscellaneous 1. Tuner 2. Firmware Update 3. Initial Setup 4. Lock Change the frequency step for the tuner. Change the settings for Firmware Update. Make the initial setup from the setup menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3. Digital Audio Input 4. Source 4. Analog Audio Input 5. Hardware 6. Miscellaneous Select the item with the cursors / of the remote controller, and press ENTER to confirm your selection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Input/Output Assign 1. TV Out / OSD Setting Item Default Value Setting Details Impose OSD On Set whether or not to display information such as volume adjustment or switching of input on the TV screen. "On": OSD is displayed on the TV. "Off": OSD is not displayed on the TV. • OSD may not be displayed depending on the input signal even if "On" is selected. In this case, change the resolution of the connected device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 2. HDMI Input Change input assignment between the input selectors and HDMI IN jacks. Setting Item Default Value Setting Details BD/DVD HDMI 1 "HDMI 1" to "HDMI 4": Assign a desired HDMI IN jack to the BD/DVD button. If you do not assign a jack, select "---". To select an HDMI IN jack already assigned to another input selector, change its setting to "---" first. GAME HDMI 2 "HDMI 1" to "HDMI 4": Assign a desired HDMI IN jack to the GAME button.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Digital Audio Input 4. Analog Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/ OPTICAL jacks. If you do not assign a jack, select "---". Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 2. Speaker 2. Crossover Change the settings of crossover frequencies. 1. Configuration Change the settings of connection environment of the speakers. Setting Item Default Value Setting Details Front 150 Hz Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Surround 150 Hz Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. • "Full Band" can be selected only when "Front" is set to "Full Band". • If the item cannot be selected even though connection is correct, check if the setting in "Configuration" - "Speaker Channels" matches the number of connected channels.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Level Calibration 5. Dolby Enabled Speaker Adjust the volume level of each speaker. Change the settings of Dolby Enabled Speakers. Setting Item Default Value Setting Details Setting Item Front Left 0 dB Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Dolby Enabled 6.0 ft/1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Audio Adjust 3. DTS Change the setting of when DTS signals are input. 1. Multiplex/Mono Change the settings of multiplex audio playback. Setting Item Default Value Setting Details Multiplex Input Channel Main Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. "Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels are output at the same time.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Source 5. Volume Change the Volume settings. Setting Item Default Value Setting Details Mute Level -∞ dB Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB". Maximum Volume Off Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", and "50" to "99". Power On Volume Last Set the volume level of when the power is turned on.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Select Select the priority for input selection when multiple audio sources are connected to one input selector. The setting can be made for each input selector button. Select the input selector to make the setting. Note that some of the default values cannot be changed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Hardware 1. HDMI Change the settings of the HDMI function. Setting Item Default Value Setting Details HDMI CEC Off Setting this to "On" enables the input selection link and other link functions with HDMI-connected CECcompatible device. "On": When this function is used "Off": When this function is not used When this setting is changed, turn off and then on again the power of all connected devices.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Audio TV Out Off You can enjoy audio through the speakers of the TV while this unit is on. "On": When this function is used "Off": When this function is not used • Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output from the TV. • Depending on your TV or input signal of the connected device, audio may not be output from the TV even if this is set to "On".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Auto Standby On/Off This setting allows the unit to enter standby mode automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" is enabled, the unit enters the HYBRID STANDBY mode which minimizes the increase in power consumption.) "On": The unit automatically enters standby mode ("AUTO STBY" lights up).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 6. Miscellaneous 1. Tuner Change the frequency step for the tuner. Setting Item Default Value Setting Details AM/FM Frequency Step (North American and Taiwanese models) 10 kHz/0.2 MHz Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Quick Menu BD/DVD HDMI A/V Sync Audio Audio Return Channel DSP Level Select the item with the cursors / of the remote controller, and press ENTER to confirm your selection. Use the cursors to change the settings.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Subwoofer: Adjust the speaker level of the subwoofer while listening to the sound. • If you set the unit to the standby mode, the adjustments you made will be restored to the previous statuses. Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be set for each input. This works in signals whose sampling frequencies are 48 kHz or less.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the input of the TV to the input connected to the unit. 2. Put batteries into the remote controller of this unit. 3. Press on the remote controller to turn the unit on. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Speaker Setup 1. Select the connected speaker configuration, and press ENTER. Note that the image on the screen changes each time you select the number of channels in "Speaker Channels". Speaker Setup Speaker Channels 5.1 ch Subwoofer Yes Height Speaker --- Select how many speakers you have. ENTER Next 2. The speaker combination selected in step 1 is displayed. "Yes" is displayed for the selected speakers. If the setting is correct, press ENTER.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Tuner BLUETOOTH function ZONE B function Remote Controller Display Others Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ When the unit is operating erratically ❏❏Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the ON/STANDBY button of the main unit for at least 5 seconds, and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Power ❏❏When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV with this unit using a digital optical cable. ( p31) ( p25) ( p71) ❏❏No sound from a connected player • Change the input selector on this unit to the position of the terminal to which the player is connected.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏The beginning of audio received by an HDMI IN cannot be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately. ❏❏Sound suddenly reduces • When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced automatically to protect the circuits.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. • When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance between TV antenna cable and cables of the unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Tuner ❏❏Poor reception or much noise • • • • • • • • Recheck the antenna connection. Move the antenna away from the speaker cord or power cord. Move the unit away from your TV or PC. Passing cars or airplanes in the vicinity can cause interference. If radio waves are blocked by concrete walls, etc., radio reception may be poor. Change the reception mode to mono ( p41). Operating the remote controller during AM reception may cause noise.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B function ❏❏Cannot ZONE B-output the audio of externally connected AV components • To output audio to ZONE B, set the audio output destination to "ZONE A+B" or "ZONE B". ( p45) ( p9) Remote Controller • • • • Make sure that the batteries are inserted with the correct polarity. Insert new batteries. Do not mix different types of batteries, or old and new batteries.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ About HDMI Compatible functions HDMI Standby Through: Even if this unit is in standby mode, the input signals from AV components can be transmitted to the TV. HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other video components. Several separate video and audio cables have been required to connect AV components so far.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Supported resolutions HDMI IN1 to IN4: • Copyright protection technology: HDCP1.4/HDCP2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ General Specifications Amplifier Section Tone Control Characteristics ±10 dB, 20 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 109 dB (IHF-A, LINE IN, SP OUT) Speaker Impedance 4 Ω - 16 Ω Headphone Rated Output 80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) Supported impedance of Headphones 8 Ω - 600 Ω Headphones Frequency Response 10 Hz - 100 kHz Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Weight 8.2 kg (18.1 lbs.) Maximum radio-frequency power transmitted in the frequency band(s) (European) 2402 MHz - 2480 MHz (4 dBm (e.i.r.p)) Compatible BLUETOOTH profiles A2DP 1.3 AVRCP 1.5 HFP(Hands-Free Profile) 1.6 HSP(Headset Profile) 1.2 SPP(Serial Port Profile) 1.2 Supported Codecs SBC AAC Transmission range (A2DP) 20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range Line of sight approx.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Outputs Output Sound Pressure Level 80 dB/W/m Maximum Input Power 150 W Normal Impedance 6Ω Dimensions (W × H × D) 244 mm × 96 mm × 102 mm 9-5/8" × 3-13/16" × 4" Weight 0.6 kg (1.3 lbs) Analog ZONE B LINE OUT 2 SUBWOOFER PRE OUT Speaker Outputs FRONT L/R (North American models support banana plugs.), CENTER, SURROUND L/R, SUBWOOFER Phones PHONES (Front, ø 6.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Frequency Response 28 Hz - 5 kHz Output Sound Pressure Level 78 dB/W/m Maximum Input Power 120 W Normal Impedance 6Ω Dimensions (W × H × D) 230 mm × 389 mm × 331.5 mm 9-1/16" × 15-5/16" × 13-1/4" Weight 4.6 kg (10.1 lbs) Others USB: 1 (Only for supplying power to Streaming media player, 5 V/1.0 A) Specifications and features are subject to change without notice.
SN 29403612A_EN (C) Copyright 2019 Onkyo & Pioneer Corporation Japan. All rights reserved.
