Owner's Manual

16
DVD
VCD CD
2 8
Play
Last
Fast forward
Fast reverse
Motion
Slow-
30
1
23
56
7
8
9
+10 0
4
REMOTE CONTROLLER
PAUSE/STEP
FR
PLAY
FF
OPEN/CLOSE
STOP
/ / / ,
ENTER
RC -425DV
FR
FF
PLAY
DVD
VCD
FR
FF
Playing back Discs (continued)
Direct Playback, Stop and Pause
■ Direct Playback via the On-Screen Menu
1. Switch on your TV set.
2. Select the desired title using the
/
/ / or the number buttons.
3. Press the ENTER button.
The DVD Changer starts playing back the selected title.
• If you do not need the menu functionality of PBC-encoded Video
CDs, set the “PBC” function to “Off”. See page 38.
■ Pausing Playback: Still mode
1. To pause playback, press the PAUSE/STEP button.
• The sound is muted during still mode.
2. Press the
PLAY button to resume playback.
Note:
The DV-C601 also provides a function for optimum display of still pic-
tures (only available for DVD videos). See “Pause/Still” on page 37.
■ Stopping Playback
Press the STOP button.
If you do not wish to resume playback from this position, see “Resum-
ing Playback from the Beginning of the Current Title” on page 17.
■ Removing a Disc
1. Stop playback.
2. Press the
OPEN/CLOSE button.
3. Wait until the disc drawer has opened completely, then
remove the disc.
Notes:
• Do not move the DV-C601 during playback or subject it to strong
vibrations to avoid damaging the discs.
• Use the
OPEN/CLOSE button on the remote controller or
DVD player to open and close the disc drawer. Do not obstruct
the disc drawer while it is moving. Doing so may cause the DVD
Changer to malfunction.
• Do not push up the disc drawer or put objects other than discs on
it. Doing so may cause the DVD Changer to malfunction.
• In many instances, a menu screen will appear after playback of a
movie is completed. Prolonged display of such a menu may
damage your television set, permanently etching that image onto
the screen. To avoid this, press the
STOP button on your
remote controller once playback of the movie is finished.
• If you pause a picture and leave it still for a long time, the screen
saver of the DV-C601 is automatically activated (provided the
“Screen Saver” function is set to “On”, see page 37). To deactivate
the screen saver and resume playback, press the
PLAY button.
You can play back discs at various speeds, and resume playback in various ways. Use the
remote controller for the following functions.
Fast Reverse and Fast Forward Playback
Press the FR (fast reverse) or FF (fast
forward) button during playback.
• DVD videos
The playback speed changes to twice the
normal speed in the selected direction.
Press the button again to further increase the
fast forward or reverse speed.
FR: press this button to quickly return to an
earlier position.
FF: press this button to advance to a position
behind the current position.
2 8 30
TV screen
X2 the normal
speed
X8 the normal
speed
X30 the normal
speed
The direction of the arrow varies depending on
the button you press.
• VIDEO CDs/Audio CDs
For Video and Audio CDs, there are two fast
forward and reverse speeds.
FR1 FR2
FF1 FF2
TV screen
Fast reverse
playback
Fast forward
playback
■ Resuming Normal Playback after Fast Forwarding/
Reversing
After locating the desired position, press the
PLAY button to resume normal
playback.
• The DVD Changer does not play back sound or subtitles during
fast reverse or forward scans of DVD videos. The sound of audio
CDs, however, is played back at the selected scrolling speed.
• The x2, x8 and x30 speeds are only approximate values. They
may vary slightly from disc to disc.
ENTER