Owner's Manual

ManualsBrandsOnkyo ManualsAudioOnkyo DV-C601

Getting Started

Connections

Function Setup

Advanced Playback

Others

Basic Playback

DVD

VCD

+10 0

REMOTE CONTROLLER

-425DV

ENTER

TOP MENU

PAUSE

STOP

PLAY

OPEN/CLOSE

POWER

DISC +/—

/ / /

FIRST SETUP

TV Shape

4:3LB

Thank you for your purchase of

our DVD-Video Player.

Please make a selection for

On-Screen Language and your TV shape

and press ENTER button on your remote control.

On-Screen Language

ENG

PLAY

Press the PLAY button.

The DVD Changer starts playback.

If you have inserted a DVD video with a title menu or a Video

CD with PBC (Playback Control) functionality, a menu screen

may appear. See “Direct Playback via the On-Screen Menu” on

page 16.

To start playback of a PBC-equipped VIDEO CD from the

menu screen, set “PBC” to “ON” via the on-screen menu

function. See page 38.

To obtain a higher picture quality

Occasionally, some picture distortion not usually visible during a normal

telecast may appear on the TV screen during playback of a DVD video. This

is due to the fact that DVD videos provide a higher resolution and therefore

also more data to process. While the amount of noise depends on the TV you

connect the DVD Changer to, reducing the sharpness setting on your TV

when viewing DVD videos may alleviate the problem.

About the

DVD

VCD

symbols

The

DVD

VCD

icons on the heading bars below show the discs that

support the function described in the section in question.

DVD

: This function is available for playback of DVD videos.

VCD

: This function is available for playback of VIDEO CDs.

: This function is available for playback of audio CDs.

Notes:

• For PBC (Playback Control) of VIDEO

CDs, see “About VIDEO CDs” on page 9.

• Depending on the DVD video you are

using, you may need to press the TOP

MENU or MENU button to display the

menu screen.

■ Inserting other discs

1. Press the OPEN/CLOSE button to open the disc drawer.

2. Press the DISC SKIP button on the main unit repeatedly until the

disc you wish to replace can be accessed.

3. Remove the disc you wish to replace, and insert another disc.

4. Press the

OPEN/CLOSE button again to close the disc drawer.

Note:

You can also press the PLAY button to automatically close the

drawer and start playback of the disc that is currently up front. To

start playback of another disc than the one in the front tray, you first

need to close the disc drawer.

■ Selecting the desired disc for playback

Press one of the DISC 1–6 buttons on the main unit or on the remote

controller. The DV-C601 starts playing the first title of the selected

disc. There is no need to press the

PLAY button.

Notes:

•

If you select the desired disc using one of the DISC

1–6 buttons while the DVD Changer is playing back a title of another

disc, playback starts with the first title of the newly selected disc.

•

You can also press the DISC SKIP button on the unit or DISC +/– but-

ton to jump to the disc in the next tray (or from tray #6 to tray #1 if the

disc in tray #6 is currently being played back). In that case playback

will start with the first title of the disc in the newly selected tray.

• If you select the desired disc by pressing the DISC SKIP button

while the DVD Changer is stopped, press the

PLAY button

to start playback of the first title of the selected disc.

■ The FIRST SETUP screen

The FIRST SETUP screen is only displayed the very first time you

switch on your DV-C601. This page allows you to set the two single

most important parameters. Note that you can change these settings

any time by selecting the appropriate on-screen menu function. See

also page 34, 35.

1. Check the video connection of the DVD Changer to your TV

set (see page 10 and following) and switch on your TV.

2. Switch on the DVD Changer.

The following menu screen page

is displayed:

3. Press the remote controller’s

or button to select “On-Screen

Language” and press the

ENTER button.

You can select one of the

following languages: ENG

(English), FRE (French), or

SPA (Spanish). That language

will be used on all on-screen

menu pages and for subtitling. See

page 35.

4. Select the desired language using the

or button and

confirm by pressing ENTER.

Note:

If you agree with the currently selected language, just press ENTER

without changing the setting.

5. Press the

button to select the “TV Shape” function and

confirm by pressing ENTER.

This function allows you to specify the picture size of your

TV. See 35 for details.

6. Use the and buttons to specify the screen size and

confirm by pressing ENTER.

7. Press the SETUP button to store your settings.

The settings are stored and you are returned to the FIRST SETUP

screen page. As stated above, you can also change these settings

at a later stage. See page 32.

DISC

ENTER

To select the items

on the screen.

After selecting an

item, confirm your

choice by pressing

ENTER.

PLAY