Instruction manual

45
Playing External Components
Connect the external components correctly. See “Con-
necting Other Components” on page 19.
By making an u (remote interactive) connection
with an Onkyo u-capable component and speci-
fying the selector name of the component, the com-
ponent can be controlled with the u control
interface, working with the CD/HDD receiver.
Playing External Components
1
Switch the input source.
Press the INPUT [q]/[w] button to select
LINE1, LINE2, or LINE3.
You can also use the
CD/HDD receiver’s
[INPUT SELECTOR] button to select
the input source.
2
Start playback.
For the playback operation, see the
instruction manual of the external com-
ponents connected.
Making an u Connection with
Onkyo Components
What can you do with u?
You can use the CD/HDD receiver's remote controller
to operate components with an
u connection. See
“Controlling External Components” on page 73.
When you start playback on a component with an
u
connection, the CD/HDD receiver automatically
switches the input source (Direct Change).
While the CD/HDD receiver is in Standby mode, if
you turn on the power or start the playback of the com-
ponents with an
u connection, the CD/HDD
receiver will automatically turn on. When the
CD/HDD receiver is set to Standby mode, the compo-
nents with an
u connection will also enter Standby
mode (Auto Power ON/Standby).
INPUT
/
1
Switch the input source to a com-
ponent you want to have interac-
tive control.
Press the INPUT [q]/[w] buttons. You
can also use the CD/HDD receiver’s
[INPUT SELECTOR] button to select
the input source.
2
Press the [TOOLS] button and
then press [ENTER] with “Tool”
selected.
3
Press [ENTER] with “Name
Select” selected.
4
Press the Up and Down [q]/[w] to
select a u-capable components.
*1 This should be selected if you connect an
audio processor such as the Onkyo UE-205.
To cancel changing the selector name,
press the [RETURN] button.
5
Press [ENTER].
“Complete!” will be displayed, and the
selector name of the external component
has been set. The external component
can be controlled via u.
Record
Tool
Audio
Tool
Name Select
DOCK PC
DAT
TAPE VIDEOMD
DIGITAL CD-R/dig
PC/digGAME/dig
*
1
CD-R
Tool
:TAPE
Name Select
Selector indicator Selector name