Owner's Manual

15
ChadEdit User Guide
Basic Tasks
In this section we assume ChadEdit is running and contains the configuration
you want to change.
How do I start with the factory default CCF?
The ChadEdit distribution comes with a single sample CCF in
<install>/Samples where <install> is the directory where ChadEdit has been
installed. This sample CCF is called default_udb.ccf and it contains the factory
default configuration loaded in your USR-5. Load this CCF to start with the factory
default CCF. See How do I load a configuration from a CCF into ChadEdit?
for instructions on how to load a CCF into ChadEdit.
How do I open a panel view?
1. Find the name of the panel you want to open in the tree view on the left
side of the ChadEdit window. Click on
in front of DEVICES or MACRO
GROUPS to display the list of all devices or macro groups. Click on
in
front of HOME, or a device or macro group name, to display the list of all
its panels.
2. Double-click on the name of the panel you want to open. A panel view for
that panel will open in the area on the right side of the ChadEdit window.
Closing a panel view will not undo any changes made to that panel view. A panel
view is merely a view on the current configuration, and any changes to it are
immediately incorporated into the current configuration.