Operation Manual

EN
10
4. FUNCTIONAL OVERVIEW
4.1 Front Panel
911
1 2 3 4 5* 6 7 8*
10
* The unit can also be turned on by pressing these
buttons.
1. . ON/STANDBY button
2. 3D indicator
3. Disc tray
4. Display
5. (open/close) button*
6. Δ (pause) button
7. Ê (stop) button
8. B (play) button*
9. H / G (skip down / up) buttons
10. Infrared sensor window
11. SOURCE DIRECT button
4.2 Rear Panel
2
1
67
8
34
5
101112
9
1. AC INLET terminal
2. AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL)
jacks
3. VIDEO OUTPUT (COMPONENT) jacks
4. VIDEO OUTPUT (VIDEO) jack
5. IR IN jack
6. IR OUT jack
7. CONTROL CONNECTOR (RS-232)
8. AUDIO OUTPUT (ANALOG L / R) jacks
9. ETHERNET terminal
10. HDMI OUT SUB jack
11. HDMI OUT MAIN jack
12. USB input
C Caution
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have an RF modulator.
Do not connect any device other than USB flash drive,
USB card reader or USB hub into USB input. (e.g. PC,
external HDD, MP3 player, digital camera, keyboard,
mouse, etc.)