Instruction manual

EN
46
11.6 Software Update
[HOME ] Ȼ “Settings” Ȼ “Others” Ȼ “Software Update”
This unit lets you update the software yourself using a
software update disc or USB flash drive. To update the
software, you must first download the latest version
software to a PC. Then write the update to a disc or USB
flash drive, then execute “Software Update”.
ɶ Disc / USB Update
You can update the software by using a disc or USB flash
drive.
Prepare a software update disc or USB flash drive:
Access www.onkyo.com, and download the latest version
software to a blank disc or USB flash drive using a PC by
following the directions described on the website.
• Use a blank disc or USB flash drive and download one
software per disc and USB flash drive.
• For more details on how to download the software,
please refer to the website.
1. Use [Î / ï / Í / Æ] to select “Settings” in the home
menu, then press [ENTER].
2. Use [Î / ï] to select “Others”, then press [ENTER].
3. Use [Î / ï] to select “Software Update”, then press
[ENTER].
4. Use [Î / ï] to select “Disc” or “USB”, then press
[ENTER].
5. Use [Í / Æ] to select “Yes”, then press [ENTER].
6. Insert the disc or connect the USB flash drive for
software update.
7. After loading disc or USB flash drive, confirmation
message will appear. Select “Yes” and press [ENTER]
to start updating.
• It may take a while to complete the updating.
8. After the update finishes, this unit will restart. Remove
the disc or USB flash drive from the unit.
C Caution
• Please do not unplug the AC power cord while
executing the “Disc / USB Update”.
D Note
• All settings will remain the same even if you update
the software version.
ɶ Network Update
You can update the software by connecting the unit to the
Internet.
1. Follow steps 1 to 3 in “Disc / USB Update” on page 46.
2. Use [Î / ï] to select “Network”, then press
[ENTER].
3. Use
[Í /
Æ] to select “Yes”, then press [ENTER].
• This unit will then start checking for the latest
software version.
4. Confirmation message will appear. Select “Yes”, then
press [ENTER].
• The unit will start downloading the latest software
version.
5. When the download completes, confirmation message
will appear. Press [ENTER].
• The unit will start updating the software version.
• It may take a while to complete the updating.
6. After updating finishes, this unit will restart
automatically.
C Caution
• Please do not unplug the AC power cord or LAN
cable while executing the “Network”.
D Note
• In order to update the software via the Internet, you
must connect the unit to the Internet and set up
necessary settings.
• For the network connection, refer to “Connection to
the Network” on page 18.
• For the network setup, refer to “Network
Connection” on page 40.
• All settings will remain the same even if you update
the software version.
E5XB0_2ED_EN_Book.indb 46E5XB0_2ED_EN_Book.indb 46 2011/04/30 14:18:062011/04/30 14:18:06