User Manual

15
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc�|
> Basic Manual
■ 3� DTS
Setting Item Default Value Setting Details
DTS Auto
Surround
On When inputting DTS signals that include extended
channel information, the optimum listening mode is
automatically selected according to the extended
information contained in the input signal and the
speaker configuration of this unit when playing in
the straight decoding listening mode.
"On": Use this function
"Off": Audio is played using the same amount
of channels in the input signal according to the
speaker configuration of this unit.
•
The ES Matrix and ES Discrete listening modes
cannot be selected if this function is set to "Off".
■ 4� LFE Level
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel
PCM, and DSD signals.
Setting Item Default Value Setting Details
LFE Level 0dB Select the low-frequency effect (LFE) level of each
type of signal from "0dB" to "−󲍤dB". If the low-
frequency effect sound is too strong, select
"−20dB" or "−󲍤dB".
■ 5� Volume
Setting Item Default Value Setting Details
Mute Level −󲍤dB Set the volume lowered from the listening volume
when muting is on. Select a value from "−󲍤dB",
"−40dB", and "−20dB".
Maximum Volume Off Set the maximum value to avoid too high volume.
Select a value from "Off", "50" to "99".
Power On Volume Last Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level before
entering standby mode), "Min", "1" to "99" and
"Max".
•
You cannot set a higher value than that of
"Maximum Volume".
Headphone Level 0 dB Adjust the output level of the headphones. Select a
value between "−12 dB" and "＋12 dB".