User's Manual
En-9
About Your iPod/iPhone
iPod touch (1st, 2nd, 3rd, and 4th generation),
iPod classic, iPod nano (2nd, 3rd, 4th, 5th, and
6th generation), iPhone 4, iPhone 3GS, iPhone 3G,
iPhone
Note:
• Before you begin using it, please update your iPod/
iPhone to the latest version. For details, refer to the
Apple website.
■ About the Dock Adaptor
The ABX-N300’s dock uses the Universal Dock system.
By attaching an interchangeable part called a dock
adaptor, you’ll be able to insert your model of supported
iPod/iPhone.
• Use a commercially available dock adaptor or the one
that was included with your iPod/iPhone. If you insert
your iPod/iPhone into the ABX-N300 without the
appropriate dock adapter, excessive strain will be
applied to the connector, damaging the dock
connector or the dock connector port of your iPod/
iPhone.
• If your iPod is a compact and lightweight model, and
has no compatible adapter, you may connect it
directly.
■ Removing the Dock Adaptor
As shown in the illustration below, insert a slotted
screwdriver or similar object into the slit of the dock
adaptor, and lift the adapter up.
• If you connect an iPod/iPhone to the ABX-N300
without attaching a dock adapter, you risk straining
and damaging the connector. Even if the dock adapter
is connected, you should avoid straining the connector
by moving or wiggling the connected iPod/iPhone.
• When inserting or removing your iPod/iPhone, take
care to insert or remove it in a straight line with the
angle of the connector, and do not use excessive force.
• Do not forcefully press the controls of your iPod/
iPhone while it is connected to the ABX-N300, or
wiggle your iPod/iPhone forward or backward. Doing
so will cause damage or faulty contacts in the
connector.
• Do not use the system in conjunction with other
accessories such as an FM transmitter or microphone.
Doing so may cause faulty operation.
• If your iPod/iPhone is in a case, it might not be able to
fully connect with the connector, causing failure to
sound or inability to operate the remote control.
Remove your iPod/iPhone from its case before
inserting it in the ABX-N300.
You can perform the following linked operations;
however some of these operations might not work
depending on your model of iPod/iPhone or the content
being played.
• Power on/off (standby) operation
When you switch the ABX-N300’s power on/
standby, your iPod/iPhone will be switched
accordingly.
• Timer operation
The ABX-N300’s timer will cause your iPod/
iPhone to perform timer playback.
iPod/iPhone Models that can be
connected
Move the slide cover
to the left to expose
the dock.
Dock adapter
First align the front
edge of the dock
adaptor, and then
press down on the
rear edge.
Caution
Linked Operation with Your iPod/
iPhone
#$:0A'PDQQM2CIG6WGUFC[5GRVGODGT2/