User's Manual
En-8
Using the Remote
Controller
Remove the plastic film before using the remote controller.
When using the remote controller, point it toward the
ABX-N300’s remote control sensor, as shown below.
Replacing the Battery
Use only a battery of the same type (CR2025).
1
While sliding the stopper to the side, pull
out the battery holder.
2
Insert a lithium button battery in the battery
holder, and then replace the holder.
Notes:
• If the remote controller doesn’t work reliably, try
replacing the battery.
• If you intend not to use the remote controller for a long
time, remove the battery to prevent damage from
leakage or corrosion.
• Expired batteries should be removed as soon as
possible to prevent damage from leakage or corrosion.
ABX-N300
30°
30°
Remote control sensor
Approx. 5 m
(16 ft.)
Back side
Positive (+) side
#$:0A'PDQQM2CIG6JWTUFC[5GRVGODGT2/