User's Manual

Onity, Inc.
2100A Nancy Hanks Drive. Norcross GA 30071 USA
Phone [phone]. Toll Free 1-866-to-Onity
Fax[phone]. www.onity.biz
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de
l'interférence canadienne causant des règlements d'équipement. L'opération est
sujette aux deux conditions suivantes:
1. Ce dispositif peut ne pas causer l'interférence nocive, et
2. Ce dispositif doit accepter n'importe quelle interférence reçue, y compris
l'interférence qui peut causer l'opération peu désirée.
RF Exposure Safety Information
In accordance with FCC requirements of human exposure to radio frequency
fields, the radiating element shall be installed such that a minimum separation
distance of 20cm is maintained between it and the user or general population.
Proper use of this radio in accordance to the following guidelines will result in RF
exposure that is below the FCC recommended limits.
1. Do not hold any component containing the modular radio such that the it is
very close to or touching any exposed parts of the body, especially the
face or eyes, while operating.
2. When using any component containing the modular radio, maintain a
minimum distance of 7.9 inches or 20cm or more from the body of all
persons.
3. Only operate the modular radio in the following Onity host devices:
Wireless DDC Thermostat(WDDC), Door Switch Transmitter(RFDSW),
and PIR Motion Sensor(RFPIR).