Operation Manual

METER SET-UP

The OneTouch

UltraSmart

Meter was pre-set at the factory

with the date and Paci f i c Standard Time, and display language.

The glucose units are pre-set at the factory and cannot be

changed. You must enter Set-up mode to:

• Change the date, time, or display language. (Glucose units

cannot be changed.)

• Customize the meter features that allow you to track

diabetes pills, insulin doses, and insulin pump information.

• Customize advanced features such as averages, meal

schedule, target glucose range, and hypoglycemia level.

Entering Basic Set-up Mode

To enter Set-up mode, press and hold down BOTH the

Back button

and the OK button

at the same

time for at least two seconds.

Note:

• It is important that the time of day is correct and that your

medication set-up and mealtimes are set according to

your personal daily schedule. Otherwise, some FastFacts

information will not be correct.

• You do not need to change any of the meter settings in order

to begin testing. Simply insert a test strip to turn on the meter

and proceed with the test (see pages 19–39).