Operation Manual

52
MESSAGE WHAT IT MEANS
There may be a
problem with the
meter or the meter
may need to be
reset.
Error message that
could be caused by
either a used test
strip or a problem
with the meter.
ACTION
To reset the meter,
you must turn the
meter off and enter
Set-up mode (see
pages 58–61). Reset
the language, time,
and date. You must
also reset the meter
code to match the
code on the test
strip vial. If you
continue to get an
Error 1 message,
Do Not use the
meter. Call LifeScan
Customer Service at
1 800 227-8862 for
a replacement
meter.
Repeat the test
with a new test
strip. Refer to pages
7–8 for test strip
information. If the
error message
persists, call
LifeScan Customer
Service at
1 800 227-8862.
WA RNING
See Owner’s Booklet
Error 1
Call customer service
WA RNING
See Owner’s Booklet
Error 2
Meter or strip problem
Please repeat test