Operation Manual

Point the Sampler down and away. Push

the release button to ensure that the

Sampler is not cocked. Push forward on

the ejection/cocking control and eject the

lancet directly into a container for sharp

objects. Used test strips can go into the

same container. Return the

ejection/cocking control to the middle

position. Replace the

OneTouch

UltraSoft

Cap.

Discarding Used Test Strips and Lancets

CAUTION: It is important to discard the used lancet carefully after

each use to avoid unintended lancet stick injuries. Used test strips

and lancets may be considered biohazardous waste in your area.

Be sure to follow your local regulations for proper disposal.

Twist the OneTouch

UltraSoft

Cap

counterclockwise. (Optional: Replace the

protective disk on the used lancet by

placing it on a hard surface and pushing

the lancet tip into the disk.)

STEP 2

Eject the Lancet.

Remove the

OneTouch

UltraSoft

Cap

from the Sampler.

STEP 1