Operation Manual

35
Note: If you do not apply a blood sample within three minutes,
the meter will turn off automatically. Remove the test strip and
then insert it back into the meter to turn the meter back on.
104
mg/dL
Sep 8-02 10:30 am
Plasma-Calibrated
Result (Example)
STEP 5
Accurate Results in Just 5 Seconds.
Your blood glucose test result will appear
after the meter counts down from 5 to 1.
The test results are automatically stored in the
electronic logbook (memory). You may now:
• Use the Arrow button to compare results
(see “Additional Feature” which follows).
• Add comments to your result.
• Remove the test strip to turn off the meter.
Good
Sample
Sample
Too Small
If the confirmation window does not fill
completely before the meter begins to
count down, Do Not add more blood to
the test strip; discard the test strip and
retest. If you have trouble filling the test
strip, call LifeScan Customer Service at
1 800-227-8862 for assistance.
If the confirmation window is not full,
you may get an error message or an
inaccurate test result.