Operation Manual

16
Note: If you do not apply the control solution within three
minutes, the meter will turn itself off. Remove the test strip and
insert it back into the test port to restart the test procedure.
Note: You must select “Control Solution” to distinguish control
solution tests from blood glucose tests. Marked control solution
tests will not be included in your averages. Do Not use Control
Solution mode for testing blood.
Touch and hold a drop of
control solution where the
narrow channel meets the
TOP EDGE of the strip.
STEP 3
To ensure an accurate control solution test,
shake the vial, discard the first drop and wipe
the dispenser tip before you begin.
NARROW CHANNEL
Apply
Drop Here
TOP EDGE
➧
Apply Control Solution to the Test Strip.